brake lever
#1
brake lever
wrecked my scrambler doing wheelies up a hile and it flipped the only thing that broke was my brake lever part where it conects to the handlebars. does this mean i have to get a hole new brake lever and all the stuff that is connected to it the lever didnt break just the part that the lever is connected to im tryin to super glue it but i dought that is going to work i might try to find a use one
#3
#4
brake lever
Well I don't have the upgraded master cylinder so I am not familiar real familiar with it, but if it is anything that is under pressure when you are applying the brake, I would consider is unsafe to try and glue it back. Just think if it breaks when you are trying to stop suddenly...not pretty.
#5
brake lever
You should just have to replace that master cyl. clamp kit. It is only 24.99 on partsland # 7 or give your Polaris dealer the number to order. Master Cyl. Clamp Kit Hope that helps. And no I would not super glue It because Brakes are very important and you don't want them to fail.
Thread
Thread Starter
Forum
Replies
Last Post
oliveiracarlos
Polaris Ask an Expert! In fond memory of Old Polaris Tech.
0
09-07-2015 03:39 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)