New Trail Tech Computer with Tach
#12
New Trail Tech Computer with Tach
Ok, first thing first, lol, I believe that the new "tach" will have the speed feature, but not all the features as the current Endurance. The new Endurance II will have more features, and may run off the 12 volt systems of the quad, to keep the back light on while the quad us running. They are going to give me more info on it, but if you want to know all I have now, send me a private message and I will e-mail the conversations I've had with them to you.
Other question, I used Mothers polish on everything from the rims, steering rods, nurfs, front bumper, brake and clutch levers and WB pipe. Almost everything was done by hand, couldn't find a decent power unit, and really didn't look.
Other question, I used Mothers polish on everything from the rims, steering rods, nurfs, front bumper, brake and clutch levers and WB pipe. Almost everything was done by hand, couldn't find a decent power unit, and really didn't look.
#14
#15
New Trail Tech Computer with Tach
The RPM guage is a start.....but enthusiasts need an actual RPM readout...and down too an accuracy of at least 50 RPM's. A readout is more inportant than rpm indicator bars jumping 200+ rpm's too get too the next bar. I would personally buy one if I could tell my maximum RPM's in my higher gears too aid in jetting.
#16
#17
New Trail Tech Computer with Tach
Some of the new tach features:
Current RPM bar graph
Current RPM number display
Maximum RPM
Current Speed
Average Speed
Maximum Speed
Backlight connected to the bikes power
You can set a RPM and the bar graph flashes when you reach the RPM.
.....
....
....
Current RPM bar graph
Current RPM number display
Maximum RPM
Current Speed
Average Speed
Maximum Speed
Backlight connected to the bikes power
You can set a RPM and the bar graph flashes when you reach the RPM.
.....
....
....
#19
New Trail Tech Computer with Tach
Here is the link Geoff, but their site seems to be down right now. Trail Tech