Well I am getting a Banshee and I would like to know what I need to mix my fuel/oil mixture at. I will be using Red Line synthetic 2 stroke oil! Any opinion's!

 

i thought their oil injected

 

banshee`s are not injected like the blaster

 

the blaster i had was oil injected

 

what did the previous owner run the mix ratio at? i run 100% synthetic too: either mobil-1 mx2t or amsoil at 40:1 in my Gas Gas & have had no problems.

 

red line is a good chioce!! If you do alot of hammer around and just trial riding, I would mix it at 32:1, But you can go leaner with synthetic oil. down to 50:1 if you wanted to, but it isnt that safe.

 

The previous owner rus running Castor 927 @ 32:1, I ran redline at 36:1 this weekend! Hope it works at that ratio for me.

 

you should be fine at that ratio, redline is a great quality oil that burns very clean...(my brother used it in his race kart when he was doing that) i've been told it is so clean that sometimes it's difficult to do plug readings.

 

i use castor 927 at a 32:1 ratio i find that works the best.

 

Ridley, thanks for that piece of knowledge