oil to gas ratio for my trx250r
Mar 20, 2007 | 02:33 AM
#12
Pro Rider
Joined: Nov 2001
Posts: 1,631
Likes: 0
oil to gas ratio for my trx250r
Run the ratio at whatever the BOTTLE says to run at. There has been a lot of research done on this by the oil manufacturers. They don't put those #'s on there by happenstance.
I would also recommend running the higher quality (fully synthetic) oils. Amsoil and redline are two that come to mind. They are both recommended at 50:1 if I remember correctly.
There are other fully synthetic oils out there too. Point is, find a good quality oil, run it at the ratio they recommend, and make sure your jetting is correct on your machine.
I am with DR Turbo on this one. All of my 2-strokes have also been run anywhere from 40:1 (Golden Spectro semi synthetic), to 50:1 (Amsoil Dominator, and Redline).
That is plenty of oil for your ATV assuming that you have your ATV jetted correctly. Of course, THAT is a whole other topic altogether! LOL! [img]i/expressions/face-icon-small-wink.gif[/img]
I would also recommend running the higher quality (fully synthetic) oils. Amsoil and redline are two that come to mind. They are both recommended at 50:1 if I remember correctly.
There are other fully synthetic oils out there too. Point is, find a good quality oil, run it at the ratio they recommend, and make sure your jetting is correct on your machine.
I am with DR Turbo on this one. All of my 2-strokes have also been run anywhere from 40:1 (Golden Spectro semi synthetic), to 50:1 (Amsoil Dominator, and Redline).
That is plenty of oil for your ATV assuming that you have your ATV jetted correctly. Of course, THAT is a whole other topic altogether! LOL! [img]i/expressions/face-icon-small-wink.gif[/img]
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)