Suzuki Discussions about Suzuki ATVs.

1/4 mile drag for z400

Thread Tools
 
Search this Thread
 
  #1  
Old 08-26-2003, 10:02 PM
1Fast03z's Avatar
Range Rover
Thread Starter
Join Date: Jun 2003
Posts: 184
Likes: 0
Received 0 Likes on 0 Posts
Default 1/4 mile drag for z400

ok i was thinkin about goin to high school drags what do u think my z would run i have a full trinity exhaust kk&n 13-42 sprocket setup jetted to 160 i live in co i was gonna run the stock 20 inch tires
 
  #2  
Old 08-27-2003, 12:26 AM
kawazuki400's Avatar
Pro Rider
Join Date: Jun 2003
Posts: 242
Likes: 0
Received 0 Likes on 0 Posts
Default 1/4 mile drag for z400

hey man i think around 16-18 seconds.ive seen friends on their banshees with tommy pipes do it in 15 sec.im also thinking of taking mine to the track,ill let you know what i run.full yosh comp pipe,k&n filter no air box jet 160.stock sprockets.fairly close.
 
  #3  
Old 08-27-2003, 02:03 AM
craZ400's Avatar
Pro Rider
Join Date: Jun 2003
Posts: 493
Likes: 0
Received 0 Likes on 0 Posts
Default 1/4 mile drag for z400

The only thing I'd be scared of with your set up is to much low end from your sprocket selection. Stock is 15-40 right? To much torque on a quad on pavement will just stand it up, leaving unused power to keep from flipping. I'd go bigger front smaller rear, lose some torque but gain top end. JMO
 
  #4  
Old 08-27-2003, 02:37 AM
bigugly's Avatar
Pro Rider
Join Date: Aug 1999
Posts: 322
Likes: 0
Received 1 Like on 1 Post
Default 1/4 mile drag for z400

And lean forward and shift weight toward rear after moving if the front end is close enough to the ground, hehe.
 
  #5  
Old 08-27-2003, 02:47 AM
wildchild660R's Avatar
Pro Rider
Join Date: Jan 2003
Posts: 1,058
Likes: 0
Received 0 Likes on 0 Posts
Default 1/4 mile drag for z400

ya craZ400 is definately right. You would be rapped out in 5th before half track. Definately put taller gearing on.
 
  #6  
Old 08-27-2003, 03:27 AM
95Blitz's Avatar
Trailblazer
Join Date: Mar 2003
Posts: 50
Likes: 0
Received 0 Likes on 0 Posts
Default 1/4 mile drag for z400

14F is stock
Go with a 15F and a 39R.
If you can pull it to 8250RPM in 5th thats about 75MPH with 20" tall tires.
 
  #7  
Old 08-27-2003, 10:17 AM
craZ400's Avatar
Pro Rider
Join Date: Jun 2003
Posts: 493
Likes: 0
Received 0 Likes on 0 Posts
Default 1/4 mile drag for z400

Thanx 95blitz, I couldn't remember if it was 14 or 15 on front. And if you can, bigger tires on the back will give you a couple more mph.
 
  #8  
Old 08-28-2003, 12:20 AM
1Fast03z's Avatar
Range Rover
Thread Starter
Join Date: Jun 2003
Posts: 184
Likes: 0
Received 0 Likes on 0 Posts
Default 1/4 mile drag for z400

if i go im going to put on my 22 inch tires it fly's as it is right now i tested it down the street got to top of third gear in about 60-75 feet
 
  #9  
Old 08-28-2003, 12:29 AM
Sdcali15's Avatar
Trailblazer
Join Date: Dec 2002
Posts: 43
Likes: 0
Received 0 Likes on 0 Posts
Default 1/4 mile drag for z400

exactly......you'll only have about 1300 more feet to go after that......think about that........if you were in 3rd in 65-70 ft, when do you think you'll hit 5th.......200ft??? fifth wound out.......350ft???? only another 1000 to go......you'll just be pingin the limiter
 
  #10  
Old 08-28-2003, 07:19 PM
1Fast03z's Avatar
Range Rover
Thread Starter
Join Date: Jun 2003
Posts: 184
Likes: 0
Received 0 Likes on 0 Posts
Default 1/4 mile drag for z400

yeah but if i get to 65 really fast that will help since most cars finish at about 80-95 mph stock
 


Quick Reply: 1/4 mile drag for z400



All times are GMT -5. The time now is 10:47 AM.