Suzuki Discussions about Suzuki ATVs.

lt230s

Thread Tools
 
Search this Thread
 
  #31  
Old 11-14-2003 | 01:44 PM
Vinson581's Avatar
Pro Rider
Joined: Sep 2003
Posts: 2,261
Likes: 0
Default lt230s

anyone know of my problem?
 
  #32  
Old 11-14-2003 | 05:02 PM
FMFrider182's Avatar
Weekend Warrior
Joined: Nov 2003
Posts: 7
Likes: 0
Default lt230s

hey rockrider, ur just mad becuase you dont have any toys that go that fast but is ok i under stand. The only good toy u do have is a quadracer but i gurantee any of my toys would kill it
 
  #33  
Old 11-14-2003 | 05:03 PM
FMFrider182's Avatar
Weekend Warrior
Joined: Nov 2003
Posts: 7
Likes: 0
Default lt230s

also my mom drives an aztec that probably will only top out at 85
 
  #34  
Old 11-14-2003 | 07:56 PM
Charlotte07's Avatar
Trailblazer
Joined: Sep 2003
Posts: 41
Likes: 0
Default lt230s

Aztec!?![img]i/expressions/face-icon-small-disgusted.gif[/img] Those are so ugly cars!

But if you say your LT230S will go 75 then there is NO way it is stock.



Oh and my 500 would smoke your Shee.
 
  #35  
Old 11-14-2003 | 09:54 PM
Vinson581's Avatar
Pro Rider
Joined: Sep 2003
Posts: 2,261
Likes: 0
Default lt230s

a aztec belongs in a junk yard and should be recycled to make a FORD..........
 
  #36  
Old 11-15-2003 | 01:49 PM
warriorgod's Avatar
Trailblazer
Joined: Nov 2003
Posts: 90
Likes: 0
Default lt230s

I know lt230racer quit well, and the fact is that his 230 can only keep my warrior to third gear and im still spinning the tires.
 
  #37  
Old 11-15-2003 | 08:01 PM
Vinson581's Avatar
Pro Rider
Joined: Sep 2003
Posts: 2,261
Likes: 0
Default lt230s

can anyone help me my 230 smokes bad, does it need rings and piston and those parts? i really need assistance.
 
  #38  
Old 11-15-2003 | 10:04 PM
MBrooks420's Avatar
Pro Rider
Joined: Mar 2003
Posts: 637
Likes: 0
Default lt230s

Is this the motor you just purchased? How bad does it run? My first guess would be valve seals. If that isn't it, it may be the rings/bore.
 
  #39  
Old 11-16-2003 | 09:45 AM
Vinson581's Avatar
Pro Rider
Joined: Sep 2003
Posts: 2,261
Likes: 0
Default lt230s

yea mbrooks do you want me to send you a pic or a video to show you what i mean? it smokes and is extreamly hard to start.

oh and the cluctch slips, is this because i am running regular 10/30 mobil i did not have 10/40 at the time?
 
  #40  
Old 11-16-2003 | 10:28 AM
MBrooks420's Avatar
Pro Rider
Joined: Mar 2003
Posts: 637
Likes: 0
Default lt230s

I probably don't need a video, just some more answers. I used to run mobil regular oil in my old 230 and the clutch never slipped. I'd try adjusting the clutch before changing the oil. Does the motor tick/knock? Is the smoke gray or blue? Does it smoke less after it's warm? If you try and pull start the motor without using the decompression lever does it occasionally pull the starter right out of your hand? If the motor still runs than nothing catastrophic happened inside the cylinder. This means that you could prob. get away with the stock piston, replacing the rings, and getting a hone job. If you are tearing into it I'd consider just going ahead and doing a ring and valve job. If you do all the labor you can it shouldn't be more than $125. If you get into a bind I could probably help you out.
 


Quick Reply: lt230s



All times are GMT -5. The time now is 10:55 PM.