try opening your air mix screw 1/4 to 1/2 turn from factory setting. If that doesn't help, it could be the pilot jet itself...possibly too lean or two rich for your altitude.

THE AZ HARD PACKER, calmiller@kachina.net

------------------
save your riding area! join the Blue Ribbon Coalition online @www.sharetrails.org

 

Could be condensation (or other contamination) in the lower depths of the float bowl.

Could be trash in main jet, air tube, needle jet.

E-mail me if you'd like some carb diagnoses and cures. Good luck.

Tree Farmer

 

i have an 86 lt250r. when i am going pretty slow at low rpm's ( w/ the clutch let out all the way) then punch it, it just bogs. i was wondering if this is normal or if it could be a jetting problem.