I am outta my mind!
#1
I am outta my mind!
I have a 1989 suzuki lt 230 laying around and just figured it needed some power. I also have a 92 suzuki dr 650 keep in mind the are both running and completly functional. I want to put the dr650 motor on the lt 230 chassis. Has anyone done this? Or could i possible use parts from a suzuki quadzilla or the lt500 I think not sure on those?[img]i/expressions/face-icon-small-confused.gif[/img]
#2
#3
#7
I am outta my mind!
IMHO, it will fit pretty easily. I have a 90 model 250 quadsport frame which should be very close to yours. My engine of choice was a 75 suzuki gt 750 and fit fit quite easily. You will have to move and modify frame braces and such, but its not too difficult really. But the bike is very short from the start, so I would recommend extending the swingarm a bit. I extended mine 8 inches and all that did was make the bike almost exactly the same wheelbase length as my stock 03 z400. You probably dont need to go that long. Also. be prepared to buy different shocks to make the bike handle properly with the increase in engine weight. Luckily I found a very cheap solution. A 750gsxr rear shock with preload, comp, and damp adjustments. I figured i would have to change the spring rate, but it is dead on because of my heavy engine. I even hit a few small jumps with 2-3 feet of air with no problems(dont think it would fair well at the mx though, lol). Ebay shock price= $35 bucks shipped to my door.
The main thing to remember is to be creative and flexible. If you find a problem, think about it and work through it, dont just give up. It soulds like you will end up with a very great setup if done properly. Good luck
The main thing to remember is to be creative and flexible. If you find a problem, think about it and work through it, dont just give up. It soulds like you will end up with a very great setup if done properly. Good luck
Trending Topics
#8
I am outta my mind!
Thanks guys i really dont wanna sell both and buy one. I have both laying around with some time on my hands. I want this to be just for sh**'s and giggles. I want to drag race it at the local ohio valley race track and occasally try to trail ride[img]i/expressions/face-icon-small-shocked.gif[/img]
Anybody know how easily quadzilla plastics or parts adapt to a lt230. Or what have people done about replacing the stock plastic aftermarket or custom parts off another bike?
Thanks turbojosh
Anybody know how easily quadzilla plastics or parts adapt to a lt230. Or what have people done about replacing the stock plastic aftermarket or custom parts off another bike?
Thanks turbojosh
#9
#10
I am outta my mind!
Originally posted by: turbojosh
Thanks guys i really dont wanna sell both and buy one. I have both laying around with some time on my hands. I want this to be just for sh**'s and giggles. I want to drag race it at the local ohio valley race track and occasally try to trail ride[img]i/expressions/face-icon-small-shocked.gif[/img]
Anybody know how easily quadzilla plastics or parts adapt to a lt230. Or what have people done about replacing the stock plastic aftermarket or custom parts off another bike?
Thanks turbojosh
Thanks guys i really dont wanna sell both and buy one. I have both laying around with some time on my hands. I want this to be just for sh**'s and giggles. I want to drag race it at the local ohio valley race track and occasally try to trail ride[img]i/expressions/face-icon-small-shocked.gif[/img]
Anybody know how easily quadzilla plastics or parts adapt to a lt230. Or what have people done about replacing the stock plastic aftermarket or custom parts off another bike?
Thanks turbojosh