cylinder on lt500
#1
cylinder on lt500
Ive got a lt500 and one of the cylinders I run was sent to cpi in Utah. These guys go to extreme modifications on two stokes on my cylinder they shaved around 1/8 of an inch on the top of the cylinder they did this to change port timing so you have to run a rm500 piston in place,but it is hard to find these pistons. So what I was wondering if I could cut out a piece of aluminum to take up the gap and put it back to a lt500. help thanks.
#2
#3
#7
Trending Topics
#9
cylinder on lt500
i forgot to mention but it might be worth having a look here
www.macdizzy.com
its a 2stroke tuning forum, its subscription only, but there is a lot of expertise on there,
www.macdizzy.com
its a 2stroke tuning forum, its subscription only, but there is a lot of expertise on there,
#10
cylinder on lt500
I dont know if your familiar with the st anthony dunes but there is a hill called choke cherry. The jug that isnt shaved will most of the time pull 4th gear out of it . The other jug I only had it over there once and time i was on my way over there I was running to lean on thunder hill and leaned it out it took my buddies banchee to pull start me and we ran over to choke and it pulled 3rd gear with 12 paddle haulers.