hmm wierd im looking at both heads and they are same niether matching the goofy gasket btw my gaskets were all dealership maybe thats how the k and s is made gl thats wierd

 

just got some info back apparently that is the right gasket, the company has changed the way the holes are in the gasket for better cooling. i have the whole detailed explanation in an email but forget most of it haha. i think with a few less holes the water is forced thru better or something. anyhow thanks for all the help.
mike

 

makes sense knew heads were same lol . glad u got it figured out gl mike

 

I told you the factory gaskets were different. Make sure of one thing though....put the most holes to the front (exuast) were the heat is.

 

The only difference in Gaskets are the reed cage gaskets.

 

yeah bob your right .but his confusion was they changed the holes for coolant in the head gasket on k and s so it didnt match his old one...

 

thanks for the heads up on which way to put the gasket on!! man that was some confusing stuff haha. on top of that the guy that had it before said it was bored 10 over....hmmm........
well when we got the piston checked it was 67mm.... stock bore hmmm.... so i was going to put a 30 over piston on ebay and and buy a stock bore wiseco but i decided to grind down all the black residue to look at top of piston......50 hmm
i hate when you byy something off someone who knows nothing about the machine they own it just makes everything you do a pain in the *** hehe ... so ill make another thread about this but ill ask in here first.
can u guys give me the best jetting size for a 30 over 87 quadracer, with an fmf fatty and slip on, and boyseen pro reeds.
thanks
mike