Z400: Too Lean?
#11
#12
Z400: Too Lean?
Originally posted by: hondabuster
If you look here
carb picture
Its #16, on the bottom side of carb.
If you look here
carb picture
Its #16, on the bottom side of carb.
What is the black **** attached to #52?
Thanks,
-ThaChad
#14
Z400: Too Lean?
I have about the same set up as you. If I take my airbox lid off, it starts popping. I am going to have to experiment with my jets also. What size are you running now? One thing you could do is barely turn the choke on and see if it runs better. You need to get a service manual and do the jetting yourself, seeing as you might have to rejet many times before you get it right. It will save you lots of money in the long run to buy the manual and do it yourself.
#16
#17
Z400: Too Lean?
I'm going through the same jetting stuff right now. I found a great tuning advice page at( www.hmfengineering.com) regardless of the pipe you run, they spell out the tuning procedure in the forums section applicable to all 4 strokes.
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)