05/06 Z400 reverse limiter
#12
05/06 Z400 reverse limiter
OK so I got a plan since I haven't got an answer. Well actually 2
1.) I'll disconnect the reverse wire from neutral safety switch and tie it through straight to light so light still works. I'm sure this is all that is done for the 03/04 models.
or
2.) I'll install a single pole double throw relay with a 12 v coil with the common on the wire from the safety switch. The normally closed contact will go where it supposed to from factory. The NO contact will go to the light. I'll have a momentary contact switch to power the coil.
So that way it will only bypass the limiter while I'm pressing the button.
I'd rather just find a wiring schematic for it and use option 1.
1.) I'll disconnect the reverse wire from neutral safety switch and tie it through straight to light so light still works. I'm sure this is all that is done for the 03/04 models.
or
2.) I'll install a single pole double throw relay with a 12 v coil with the common on the wire from the safety switch. The normally closed contact will go where it supposed to from factory. The NO contact will go to the light. I'll have a momentary contact switch to power the coil.
So that way it will only bypass the limiter while I'm pressing the button.
I'd rather just find a wiring schematic for it and use option 1.
Thread
Thread Starter
Forum
Replies
Last Post
Steeldon
Polaris Ask an Expert! In fond memory of Old Polaris Tech.
4
09-09-2015 09:38 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)