Up until about a year and a half ago I played EverQuest since the Fall of 1999. If only I could have those years of my life back instead of playing doing something productive. I built 3 different bada$$ computers for my 3 different accounts so I could play with 3 characters while raiding etc.

I vowed not to play any games again once I finally weened myself since I have an obsessive personality but for christmas my wife and I bought a Wii for us and my 4 year old and I have been playing Call of Duty 3, in moderation of course.[img]i/expressions/face-icon-small-tongue.gif[/img]

 

<div class="FTQUOTE"><begin quote>Originally posted by: gforce34

Check this link 230cc Conversion it says you need to use the longer 115mm rod instead of using the standard 107mm rod. Now I am confused.</end quote></div>

I thought standard was 111.5??? Where did they get 107? The 71mm is the 265 kit, but I guess the piston wont come all the up in the bore unless we use a longer rod. Hmmm... Maybe that's why no valve reliefs. Maybe there is more decking my future. [img]i/expressions/face-icon-small-disgusted.gif[/img]

 

<div class="FTQUOTE"><begin quote>Originally posted by: PoolGod230
No WOW for me! Actually I tried it, bored me to tears within minutes!</end quote></div>


A few of my buds are hooked on WOW. I didn't see one guy for weeks when he first started. I wish they would get bored of it too sometimes. They say if I tried it, I would be hooked, but like crack n heroin... some things you just don't try. [img]i/expressions/face-icon-small-happy.gif[/img]


<div class="FTQUOTE"><begin quote>Originally posted by: PoolGod230
I think I may have gotten rid of my scale. I used to use it a lot in my youth, Uh, no need fot it now![img][/img] [img][/img]</end quote></div>


LOL! My little cheapo is only good up to about 1/4 ounce.


<div class="FTQUOTE"><begin quote>Originally posted by: PoolGod230
Rigged up a balance bar, 70mm drops 1in lower than .80 over, if I was fishing the 70mm would win!!! </end quote></div>


Yep, I know they get heavier when they get bigger. If you compared it to the stock piston, the 70 would hit the floor!

 

<div class="FTQUOTE"><begin quote>Originally posted by: gforce34

Up until about a year and a half ago I played EverQuest since the Fall of 1999. If only I could have those years of my life back instead of playing doing something productive. I built 3 different bada$$ computers for my 3 different accounts so I could play with 3 characters while raiding etc.



I vowed not to play any games again once I finally weened myself since I have an obsessive personality but for christmas my wife and I bought a Wii for us and my 4 year old and I have been playing Call of Duty 3, in moderation of course.[img][/img]</end quote></div>


Yup, that's why I won't touch a game anymore. I was lucky enough to never really get into a role playing game though, but I wasted a fair amount of time of need for speed a number of yrs ago. Just cant put it down until I beat the game.

I can tell yer a bit on the OCD side when you put off paying bills to juice up your quad, lol. I'm the same way. [img]i/expressions/face-icon-small-wink.gif[/img] Damn obessesions! [img]i/expressions/face-icon-small-mad.gif[/img]

 

<div class="FTQUOTE"><begin quote>Originally posted by: gforce34
I have been playing Call of Duty 3, in moderation of course.[img][/img]</end quote></div>

That's what they ALL say... In the beginning... LOL

 

anyone know what needle jet comes stock in the tm28?

 

the jet or the needle?

 

 

Jet sizes : Main : 180; Pilot : 15; Needle Jet : P-8; Throttle Valve : 25; Jet Needle : 5DP39-3.

The 5L1 is the same needle as the stock 250s uses.

 

yea p-8 is what i found too. i think i am gonna try a few richer to go with the the 5l1 needle, i think that might help. i might go with a q-0 or q-4 and see if i can get it a tad richer off the bottom.