Suzuki Discussions about Suzuki ATVs.

paddle size please help

Thread Tools
 
Search this Thread
 
  #1  
Old 04-09-2006 | 05:24 AM
IRISHDIRTBIKEATVRIDER's Avatar
Thread Starter
|
Trailblazer
Joined: Oct 2005
Posts: 35
Likes: 0
Default paddle size please help

i just ordered 22-11-10 itp paddle tires for my kfx400 .. are these tires too big for my quad or will i lose my bottom end power. my quad is piped and jetted and ihave the big gun rev box ..they fit on my quad its just that iv heard that i wont be able to lift the front end up very easy and climbing hills will be a problem .. please let me know.. thanks ....any z400 kfx or dvx duners out there heard or tried 22-11-10s


 
  #2  
Old 04-09-2006 | 06:40 AM
kawiking's Avatar
Pro Rider
Joined: Jun 2005
Posts: 978
Likes: 0
Default paddle size please help

are those sand stars? i run a 20-11-10 sand skate 2, when i started running paddles i dropped 1 tooth down on the front sprocket. just dont run alot of air in them, they will be alright. they are going to take away some power but you'll be ok, just drop that front sprocket.
 
  #3  
Old 04-09-2006 | 12:01 PM
Yoshimura660's Avatar
Trailblazer
Joined: Jan 2006
Posts: 67
Likes: 0
Default paddle size please help

I would'nt worry to much i run 22-11-12 on my raptor and yes there was minor power loss but i made it up every hill and i have no douts that there is not a hill i cant climb and i even did fine dragging.
 
  #4  
Old 04-09-2006 | 04:00 PM
mucky's Avatar
Pro Rider
Joined: Jun 2004
Posts: 1,857
Likes: 0
From: Phoenix
Default paddle size please help

I had 22" before and didnt care for them. they give you great top end speed but you loose low end torque
you will have to regear your quad if you want low end. I run 20-11-10 9 paddle haulers now and run a 13/39 gearing
and I mostly run the dunes in 4th gear
if you want 22" you will be running in lower gears with low torque
 
  #5  
Old 04-09-2006 | 11:49 PM
IRISHDIRTBIKEATVRIDER's Avatar
Thread Starter
|
Trailblazer
Joined: Oct 2005
Posts: 35
Likes: 0
Default paddle size please help

im not going to have time to get the gearing changed.im running stock gearing right now.will i have problems with the stock gearing at the dunes. and yes i got the sand stars paddle tires..
 
  #6  
Old 04-10-2006 | 12:20 AM
mucky's Avatar
Pro Rider
Joined: Jun 2004
Posts: 1,857
Likes: 0
From: Phoenix
Default paddle size please help

I think you might have problems, I would go down 1 tooth on the front to be safe, you need torque and lower gearing there
I tried stock gearing and its ok with 20" tires but with 22" I feel you wont like it

 
  #7  
Old 04-10-2006 | 12:21 AM
kawiking's Avatar
Pro Rider
Joined: Jun 2005
Posts: 978
Likes: 0
Default paddle size please help

go one tooth down on front(13 i think). i put mine on in 10 min.

mucky what is factory on the rear??
 
  #8  
Old 04-10-2006 | 12:29 AM
mucky's Avatar
Pro Rider
Joined: Jun 2004
Posts: 1,857
Likes: 0
From: Phoenix
Default paddle size please help

stock is a 14/40 gears
this place might help gears
 
  #9  
Old 04-10-2006 | 12:32 AM
IRISHDIRTBIKEATVRIDER's Avatar
Thread Starter
|
Trailblazer
Joined: Oct 2005
Posts: 35
Likes: 0
Default paddle size please help

we are going to coos bay next weekend and they said they ordered 20-11-10 for me but they said they will have them on thursday but im leaving friday morning and you know how they say something will show up at one time and end up a later date.so if i can change to the smaller tire it will be better for me ...
 
  #10  
Old 04-10-2006 | 12:35 AM
mucky's Avatar
Pro Rider
Joined: Jun 2004
Posts: 1,857
Likes: 0
From: Phoenix
Default paddle size please help

you'll be happy with the 20" you'll notice the bike will perform better and you still might want to regear in the future
to fine tune it to what you want
 



All times are GMT -5. The time now is 04:09 PM.