Hi guy's
Does any-one run a steering stabilizer on the King quad's. I've only had the bike for a few month's and went on a mud run this weekend and the front steering is terrible as it dive's very hard into the corner's and has crazy bump steer to the point of jerking the handle bar's out of my hand's.
I played with front pre-load on the spring's from hard to soft and finding the best in the middle position. Any help would be much appreciated.
Thanks
Kevin

 

hey and welcome to the forum!

im not sure if the kq750 is the same as the kq700, but atvscene.com built a 700 and said that a stabilizer helped alot. the stabilizer they used was the denton racing unit for a z400.

 

Thanks alot lt230sman for the info, I'm going to look into the denton stabilizer.

 

no problem, but im still not sure if it will fit, cuz doesnt the 750 have power steering, and the 700 doesnt? the steerings shaft and frame pieces may be different...

 

My 08 doesn't have power steering and I think it's the same as the 700.
Thanks

 

hmmm... then you might be good, but i'd just make sure that stabilizer has a return policy just in case things dont work out hahaha!