I can get it to start with hotter plugs but it fouls them out, adjusted the float level and checked the air screw to lean it out some, couldnt get it to fire at all yesterday. It isnt even firing off starting fluid. Its got spark and compression seems fine. I had it running a week ago but running rich. Why wont it start!? I recently changed the coil, cdi, and stator to get it to spark again. Its def getting spark which should at least make it fire off ether unless I am still flooding it. any ideas?

 

check to see if your right side crankcase seal is leaking oil into the combustion chamber

 

The stator side seal looks fine, havent checked the other side.

 

if the right crank seal is leaking into the chamber then you will have tranny oil on the spark plug. so its an easy check usually