Suzuki Discussions about Suzuki ATVs.

1986 lt250r timeing!!! Plz help

Thread Tools
 
Search this Thread
 
  #11  
Old 07-27-2010, 09:37 PM
NewportHillClimber's Avatar
Pro Rider
Join Date: Feb 2009
Posts: 534
Likes: 0
Received 0 Likes on 0 Posts
Default

thats the weep hole that lets you know that your water pump seal is bad. when water comes out its time for new seals and maybe a new impellor shaft
 
  #12  
Old 07-28-2010, 01:41 AM
madzilla's Avatar
Weekend Warrior
Join Date: Jul 2010
Location: kerrville tx
Posts: 14
Likes: 0
Received 0 Likes on 0 Posts
Default

ya i found that out earlier today so i took the pump cover off n impeller bolt was loose so i took the clutch cover off and the crank shaft nut was backed off and rounded off the threads in the nut the shaft i should beable to fix the threads since i have one from another motor may the seals still be good?
 
  #13  
Old 08-02-2010, 01:15 PM
liljoker1994's Avatar
Range Rover
Thread Starter
Join Date: Apr 2010
Location: naptown in
Posts: 196
Likes: 0
Received 0 Likes on 0 Posts
Default

ya the hole is just to let u know that its out and its not working the best bet is ebay
 
  #14  
Old 08-02-2010, 02:00 PM
liljoker1994's Avatar
Range Rover
Thread Starter
Join Date: Apr 2010
Location: naptown in
Posts: 196
Likes: 0
Received 0 Likes on 0 Posts
Default

ya its just to let u know its out and not working u dont have to plug it mine 250r has the same hole
 
  #15  
Old 08-03-2010, 10:38 AM
NewportHillClimber's Avatar
Pro Rider
Join Date: Feb 2009
Posts: 534
Likes: 0
Received 0 Likes on 0 Posts
Default

if u take it apart put in a new seal and check the shaft for pitting. i replaced all that in mine
 
  #16  
Old 08-04-2010, 08:06 PM
liljoker1994's Avatar
Range Rover
Thread Starter
Join Date: Apr 2010
Location: naptown in
Posts: 196
Likes: 0
Received 0 Likes on 0 Posts
Default

srry bout all those messages my computer was tweakin out but i would change the seals just to be safe
 
  #17  
Old 08-08-2010, 01:20 AM
madzilla's Avatar
Weekend Warrior
Join Date: Jul 2010
Location: kerrville tx
Posts: 14
Likes: 0
Received 0 Likes on 0 Posts
Default

i have ordered the whole pump ***. i also have a ltz 400 and have someone wanting to trade a 03 built banshee any imput on that?
 
  #18  
Old 08-08-2010, 10:43 AM
liljoker1994's Avatar
Range Rover
Thread Starter
Join Date: Apr 2010
Location: naptown in
Posts: 196
Likes: 0
Received 0 Likes on 0 Posts
Default

if u like the 2 strokes i would defanitly go with the banshee the 4 strokes just have the better low end but 2 strokes have that speed u want also its a twin
 
  #19  
Old 08-08-2010, 04:31 PM
madzilla's Avatar
Weekend Warrior
Join Date: Jul 2010
Location: kerrville tx
Posts: 14
Likes: 0
Received 0 Likes on 0 Posts
Default

ok here's the deal on the shee 96 frame 06 motor went from the 2 carb to 1 piped bored how do i know its a 06 motor? any kind of sigs on it?
 
  #20  
Old 08-08-2010, 07:07 PM
liljoker1994's Avatar
Range Rover
Thread Starter
Join Date: Apr 2010
Location: naptown in
Posts: 196
Likes: 0
Received 0 Likes on 0 Posts
Default

i think i would have stuck with the 2 carb because yamaha factory got the most power out of it by using 2 carbs but ive never rid one with one carb on it so it could be faster and the motor issu would u have to do some research between 06 motors and 96 motors to look for differences on the outside its just like the lt250r"s
 


Quick Reply: 1986 lt250r timeing!!! Plz help



All times are GMT -5. The time now is 08:02 AM.