91 King Quad Low End Torque
#31
![Default](https://atvconnection.com/forums/images/icons/icon1.gif)
The idle going up n down means the carb is lean. Maybe an air leak or it's adjusted wrong or maybe a bad fuel pump. If you want to rule out the fuel pump, blow on the vent hose coming from the gas cap and that will force gas thru the pump.
Also, try turning on the headlights and see if that helps it run better at higher rpms. If so, you have a bad regulator.
After one place sent me the wrong chain, the best price I could find was these guys at $63 shipped Parts Department | Honda East Toledo | Maumee Ohio
Also, try turning on the headlights and see if that helps it run better at higher rpms. If so, you have a bad regulator.
After one place sent me the wrong chain, the best price I could find was these guys at $63 shipped Parts Department | Honda East Toledo | Maumee Ohio
Theres about a 10 dollar difference but the diagram shows exactly the same thing
#33
![Default](https://atvconnection.com/forums/images/icons/icon1.gif)
Tanner the issue that you are having with your 200. You might want to look at changing the needle that is attached to the slide diaphragm. I think it is the jet needle..? But I had a similar problem where the needle had been worn a little and was catching and not letting the jet come open. The fuel pump could cause an issue but i would say its related to something with the slide diaphragm.
#34
![Default](https://atvconnection.com/forums/images/icons/icon1.gif)
Tanner the issue that you are having with your 200. You might want to look at changing the needle that is attached to the slide diaphragm. I think it is the jet needle..? But I had a similar problem where the needle had been worn a little and was catching and not letting the jet come open. The fuel pump could cause an issue but i would say its related to something with the slide diaphragm.
#35
#36
#37
![Default](https://atvconnection.com/forums/images/icons/icon1.gif)
Tanner the issue that you are having with your 200. You might want to look at changing the needle that is attached to the slide diaphragm. I think it is the jet needle..? But I had a similar problem where the needle had been worn a little and was catching and not letting the jet come open. The fuel pump could cause an issue but i would say its related to something with the slide diaphragm.
![Smile](https://atvconnection.com/forums/images/smilies/smile.gif)
#38
#40