2004 eiger 400 auto, taking left case off to get a dropped bearing and piece of starter out! Any recommendations on what to look for as for changing parts while I'm in there??
thanks,
Rodney aka SARGE

 

If nothing was giving trouble before, leave alone. I have had an Eiger high/low gearset seize and a 400 King Quad with that gear's bearings break up, but on KQs they had changed from bushes to needle roller bearings (why?) It may be prudent to check for loose magnets on the flywheel, but don't go mad, those magnets are only glued on and a new flywheel is expensive, and a pain to get off.

 

Thanks merryman....your definitely a knowledgeable and helpful person!!
sarge