lt250r runs rogh after pilot jet change
#1
lt250r runs rogh after pilot jet change
beffore changing the pilot jet my LT ran a little rough from 0 to1/4 throttle , almost like it was rich, so i checked the plug and the plug was soaked but not black at all, a third of the plug had a little black but the rest of the plug was perfectly clean, almost as if it never fired at all. so i raised the needle 1 notch and still the same but not worse, so i moved it the other direction 1 notch from the center and it would run on like crazy. so i changed the pilot jet from a 37.5 to a 40 and now it runs like complete **** and wont rev out at all, only pop and miss and struggle to run , but it ides just fine, i checked for leaks arounf the intake boot and base gasket and head gasket. i didnt check the crank seals yet. plz help the 4th is coming and i dont wanna watch others ride.
Spam wordSpam word Spam wordSpam word Spam wordSpam word Spam wordSpam word UPDATESpam wordSpam word Spam wordSpam word Spam wordSpam word Spam wordSpam word Well now it is smoking like crazy when i start it, i changed the plug to a hotter plug and it cleaned up the problem but now it is smoking like crazy( James Bond type smoke) , but runs fine other wise. help??
+
Spam wordSpam word Spam wordSpam word Spam wordSpam word Spam wordSpam word UPDATESpam wordSpam word Spam wordSpam word Spam wordSpam word Spam wordSpam word Well now it is smoking like crazy when i start it, i changed the plug to a hotter plug and it cleaned up the problem but now it is smoking like crazy( James Bond type smoke) , but runs fine other wise. help??
+
Last edited by AzLtRider85735; 06-30-2018 at 02:26 AM. Reason: had an update
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)