Hey roost... whats the first major mod I should make to my Shee?

Give me some insight... I hear a good porting job goes a 'looong' way with a stock banshee..... [img]i/expressions/face-icon-small-wink.gif[/img]
(mine is stock, with FMF Fatty pipes)

 

I know you where askin roost, but Id say put Rocket pipes on there, they rip FMFs apart, put on a V-Force Delta 3 reed cage,air filters,pair of carbs if you start gettin bigger into mods, but dont go big on the carbs if you dont have a lotta mods, then theres a loss in power......then RD400 rods and Blaster pistons to make it preety much the most "square" 370 combo you can run, ....

 

i have a 87 also . looks like there are alot of them out there.[img]i/expressions/face-icon-small-happy.gif[/img]

 

I've got an 87, the shop around here that works on quads say they always see 87's, no 88's or higher.

 

I have an 87 I rebuilt from a basketcase but I have descided to sell it while it is still newish and get my daughter a Z250 or Honda 250ex.......

 

I have a 1988, best quad I have ever owned. You don't see many of them around but when I go riding people always come over to look and ask questions.

 

I've got an 89' .

 

Here's 5 quadzillas for you:

I've got two '88's - both 100% stock and mint condition. I also have a stock '87 with an 88-90 upper end that I haven't finished putting back together. The '87 will be a fairly tricked out all around machine when I'm finished.

My brother has an '89 that's fairly stock except for pipe and jetting. He also has an '87 zilla that he bought in boxes and needs to be put back together.

 

my caddy is a 90 and it rips at the dunes.