Make your old wheels look new again with bed liner spray!
#1
I came up with the idea about painting the wheels after purchased a used 09 850XP with 50 miles on it. The previous owner used it for plowing & the salt from our winter roads pivoted my wheels & I did not want to install aftermarket wheels making the unit wider.
When I was finished it looked awesome!
First sand the wheel so the paint will stick.

Next I cleaned the wheels, taped them with duct tape around the rubber & in the back so you could see the aluminum when looking into the rim. I then added primer.

Next I used this spray to paint them black. Of all the bedliner sprays I have tested this is the best to work with. It does not clog or clump up.

Before & After.

Here you can see the sliver aluminium inside the wheel.

All finished.

When I was finished it looked awesome!
First sand the wheel so the paint will stick.
Next I cleaned the wheels, taped them with duct tape around the rubber & in the back so you could see the aluminum when looking into the rim. I then added primer.
Next I used this spray to paint them black. Of all the bedliner sprays I have tested this is the best to work with. It does not clog or clump up.
Before & After.
Here you can see the sliver aluminium inside the wheel.
All finished.
Thread
Thread Starter
Forum
Replies
Last Post
KimSJoh
Polaris Ask an Expert! In fond memory of Old Polaris Tech.
14
Jul 18, 2015 07:20 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)





