It's new lets see if this'll break it!
Apr 8, 2006 | 09:11 PM
#1
Thread Starter
|
Pro Rider
Joined: Dec 2005
Posts: 2,250
Likes: 0
It's new lets see if this'll break it!
I tend to test things out a bit just as soon as I can to see if it's gonna break, cause I don't want it to break down the road... better sooner rather than later...sooo
Since I have been reading about all these utilities of all sorts breaking drivetrain( diffs, axles, worrying about belts) I decided to put the plow on for added weight (summertime) then push a rail-roadtie embedded in the ground. LowRange-DiffLock, It sat there spinning all four....
NO BREAKING PARTS,,,what up guys
Let me know if you try any stupid tricks like me and what your results were/are
Since I have been reading about all these utilities of all sorts breaking drivetrain( diffs, axles, worrying about belts) I decided to put the plow on for added weight (summertime) then push a rail-roadtie embedded in the ground. LowRange-DiffLock, It sat there spinning all four....
NO BREAKING PARTS,,,what up guys
Let me know if you try any stupid tricks like me and what your results were/are
Apr 9, 2006 | 07:43 PM
#2
Extreme Pro Rider
Joined: Jan 2006
Posts: 3,752
Likes: 0
It's new lets see if this'll break it!
I usually try not to break things on my 7000 dollar toy! Dont get me wrong, i drive the crap out of it, mud, snow, rough trails, water, but i dont know if they are made to push railroad ties? Have fun though and let us know what not to do!
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)