I bought a new Swisher Dump Bucket and Mount for the Sportsman. I only have about 3" of ground clearance at the front. On the back however Instead of having my trailer reciever hitch used up i drilled a 3/4" hole about 2" from where the reciever goes into the quad. My hitch has a 2" drop so only using one spacer I gained a lot of clearance on the back end and now can pull my trailer and other stuff. The second Modification I made was drilling a hole in the left hand side of the front rack and putting a "eye" bolt on top. I bought a pull start engine handle and attached the rope to trigger the dump to that. The stops the rope and handle from gettin tangled in the wheel and makes it look a little neater. I think. Also makes the rope easier to pull with a little handle on the end too.