iced up winch
#2
Foneguy, Here's a few tricks.
Spray your cable with WD-40 next time.
Just a little cap full of Heet if it's already frozen and you can get to the cable.
Hang a light (with a hook) on the front for a little while.
Don't use a torch
Don't put the hanging light under the ATV, you may short out when starts to thaw.
You can also just release the free-fly latch, pull it out and run it back in.
Hope this helps
Spray your cable with WD-40 next time.
Just a little cap full of Heet if it's already frozen and you can get to the cable.
Hang a light (with a hook) on the front for a little while.
Don't use a torch
Don't put the hanging light under the ATV, you may short out when starts to thaw.
You can also just release the free-fly latch, pull it out and run it back in.
Hope this helps
#3
well that sounds good ill give'em a try, got it thawed with a hair drier, will covering the winch prevent ice build up? im new to the winter atving, had motocrossers b4, thanks 4 the advise [img]i/expressions/face-icon-small-smile.gif[/img]
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)




