I keep getting this response when trying to access this thread about half the time. Never when trying on any other thread on the forum though.


"500 The request has exceeded the allowable time limit Tag: CFQUERY
The request has exceeded the allowable time limit Tag: CFQUERY "

 

I can't make it this weekend... Gonna be doin' a little wrenchin'/welding this weekend. The 03 preddy has a few rattles that need attention.

Hey, while you are at it Karl, weld some tabs on them leg warmers for a heat shield. Its getting warmer out and you dont need to keep the family jewels or their near-parts so warm! LOL.[img]i/expressions/face-icon-small-wink.gif[/img]

The Bear

 

Kym, congrats on the the new "Rollin Love Shack". I am assuming it has a hitch to tow your toys. That was stupid, of course it does. Well, congrats again. Enjoy.

 

Kym, you can easily do the circuit board. I had to do mine for my hot water heater in the big trailer I have. It's usually a generic board that, depending on what you are going to use it for, you might just need to clip off a resistor or something. If you read the instructions it's pretty clear. If you need a hand, lemme know.

Also, if you don't want to do it yourself, I can recommend a mobile RV repair guy that came out and diagnosed a different problem I had with the hot water heater. He showed up the same day I called, travelled from Snohomish where I was(after coming to look at whatever it was I had wrong) to Marysville to pick up a part for me, came back and installed it. When that wasn't the problem, he found what it was, uninstalled that new part, took the part back and didn't charge me for fixing what the true problem was. He charged me $25 for the whole thing and I never had another issue after that. . Anyone that honest will always get my return business and recommendations. I have to find his card.

Are you heading my way today?

 

LIKE OMG... I can't believe you just said that [img]i/expressions/face-icon-small-shocked.gif[/img] You didnt just say that did you... LIKE WTF you know im just such a darlin [img]i/expressions/face-icon-small-shocked.gif[/img] LMAO Aww to hell with it. Bout time i drug my *** into work. Think i will take a nap now [img]i/expressions/face-icon-small-wink.gif[/img]

 

And Realtor Rider

Thanks for keeping up on the Roster! Hope to see ya soon. PM me if ya want a couple of the shots emailed to ya of the Florence Group!

Oh, on that note, some have emailed me wondering when the pic will be in the mag. It will be at least 3 months from the date I sent it. Here's how it works:

I sent it in on the first week of May. The last week of May was the deadline. So, that is the June workup. Then count three months out. So doing the math, that basically means June, July, August. The best liklihood is July or August on the stands. Hope that makes sense.

On another note, the mag already has tested the new 06 Yamahas and some of the other mfr's new bikes. They are tight lipped about them, but they have a very strict confidential agreement with the manufacturers to keep it that way. They "earn" the respect of the manufacturers and are granted the privaledge of having "first shot" at the new models by keeping their trust. But they want to have the stuff printed up in the mag for the streets about the same time the new model info is released. Being as it takes 3 months for the article workup to hit the stands, thats why they keep the secrecy.

Likewise, the manufacturers dont want to cut their sales year short by releasing info about their new model year early, because then they get guys like me that are holding out for the 06 Yamaha YFZ instead of picking up an 05.

Phew, hope all that made sense. Hope to see yall again soon!

The Bear

 

Good morning everyone. I am finally back and going to be around for a while! [img]i/expressions/face-icon-small-smile.gif[/img] I started reading thru the threads and DAMN alot has been going on. Looks like lots of new folks, welcome.

So the real question is when are we riding?? [img]i/expressions/face-icon-small-happy.gif[/img] The navy boy is gone for another 3-4 weeks so I have lots of time on my hands..... [img]i/expressions/face-icon-small-wink.gif[/img]

 

Welcome back stranger!! [img]i/expressions/face-icon-small-happy.gif[/img] It looks like wingdude and acouple others are heading over to Moses Lake this weekend. As for the next bid ride it looks like its going to be the 24-26 at Easton. I'm gonig to be driving over early Saturday morning. You can camp there or do a day trip like i'm going to do. I'm sure when we get closer to that ride more info will be thrown out. I hope you can make it to the Easton ride. Again Welcome back!!

 

My friends and I are making a day trip to Elbe this Sunday if anyone is interested. We will be metting at the South Hill Fred Meyer and 0900. The South Hill Fred Meyer is located at S Meridain and 176 ST E. Hope to you there, Troy.

 

If I did it, so can you! There's a small double on the big track that is easy and won't kill you if you don't make it. It's great to practice on.
I'm bringing lots of beer for after practice too. [img]i/expressions/face-icon-small-happy.gif[/img]