Old PSAR thread - please see the new one
Jun 26, 2005 | 05:23 PM
Extreme Pro Rider
see how you are!
see how you are!
Joined: Oct 2003
Posts: 3,300
Likes: 0
Puget Sound/Seattle NW Area Riders Meet HERE!!!
Parts list:
Steering stem
Handle bars
Grips
Throttle lever
Front brake lever
Gas cap
+++++++++++++++++++++
Anybody have feed back on what kind of handle bars to order? I see there are a bunch-o-choices. OEM bars were a good fit...
Grips... anybody have a preference?
What's so good about the Roll Design steering stem? RMATV is proud of it apparently...
Kinda funny looking through the RMATV catalog... the illustrations for the clutch levers are shown on the right hand side of the handle bars... Initally thought I found brake levers.
Steering stem
Handle bars
Grips
Throttle lever
Front brake lever
Gas cap
+++++++++++++++++++++
Anybody have feed back on what kind of handle bars to order? I see there are a bunch-o-choices. OEM bars were a good fit...
Grips... anybody have a preference?
What's so good about the Roll Design steering stem? RMATV is proud of it apparently...
Kinda funny looking through the RMATV catalog... the illustrations for the clutch levers are shown on the right hand side of the handle bars... Initally thought I found brake levers.
Jun 26, 2005 | 05:25 PM
Pirate Biker
Limping Rider!
Limping Rider!
Joined: May 2003
Posts: 61,719
Likes: 55
From: Snohomish, Washington
Puget Sound/Seattle NW Area Riders Meet HERE!!!
[quote]
Originally posted by: HappaRap
Hey, don't forget about BigDaddy out with a screwed up knee layed up at home for a week so far and I'm flat on my back, walking when I have to with a cane from a tweaked lower back, of course both of ours were non-riding incidents, but broken up anyway.
That's called "Aquired Genetic Engineering" and the acronym for that is AGE
Originally posted by: HappaRap
Hey, don't forget about BigDaddy out with a screwed up knee layed up at home for a week so far and I'm flat on my back, walking when I have to with a cane from a tweaked lower back, of course both of ours were non-riding incidents, but broken up anyway.
Jun 26, 2005 | 07:15 PM
Elite Pro Rider
Lazy Boy Rider!
Lazy Boy Rider!
Joined: Jun 2003
Posts: 15,700
Likes: 0
Puget Sound/Seattle NW Area Riders Meet HERE!!!
Originally posted by: Red400EXRod That's called "Aquired Genetic Engineering" and the acronym for that is AGE
Jun 26, 2005 | 07:21 PM
Pro Rider
Joined: Jan 2005
Posts: 2,050
Likes: 0
Puget Sound/Seattle NW Area Riders Meet HERE!!!
Jenna broke a "****" off her radious, I think. It is right where it joins at the elbow. No cast yet, she sees a specialist on Monday. She also did something to her wrist, don't know what til then.
Larry, you are right, she already said BLACK.
I picked up her x rays and saw the break right away, I have no idea how the doc missed it. It is clear as day.
As for riding, it will all depend on what the doc says.
While I was in the ER, 2 different people where brought in from Pacific Raceways. One was a 14 or 15 year old boy with a broken foot, 1st race 1st lap. the other was a twenty something man who came in an ambulance, strapped to a back board with head secured. I would say he was pretty bad off except for his wife/girlfriend was taking pixs of him getting off the ambulance with thumbs up.
Larry, you are right, she already said BLACK.
I picked up her x rays and saw the break right away, I have no idea how the doc missed it. It is clear as day.
As for riding, it will all depend on what the doc says.
While I was in the ER, 2 different people where brought in from Pacific Raceways. One was a 14 or 15 year old boy with a broken foot, 1st race 1st lap. the other was a twenty something man who came in an ambulance, strapped to a back board with head secured. I would say he was pretty bad off except for his wife/girlfriend was taking pixs of him getting off the ambulance with thumbs up.
Jun 26, 2005 | 07:34 PM
Extreme Pro Rider
Joined: Mar 2003
Posts: 3,828
Likes: 0
Puget Sound/Seattle NW Area Riders Meet HERE!!!
MAN!!!!! Im glad I I I I I dont ride those danger prone 4 wheelers like you guys do!!!!!!!!!!!! IM going to stick to drag racing and only going 100mph in a 100 yards[img]i/expressions/face-icon-small-shocked.gif[/img][img]i/expressions/face-icon-small-happy.gif[/img]
Jun 26, 2005 | 07:34 PM
"One Wheel Short"
slow day around the orafice I see!
slow day around the orafice I see!
Joined: Jun 2004
Posts: 10,545
Likes: 0
Puget Sound/Seattle NW Area Riders Meet HERE!!!
Well, mini and momma just got home from the ER, Looks like his X-ray will be "looked at more closely, by a more qualified person" WTF? I guess they are fairly sure they are not educated enough to say if his arm is broke or not.
Ya I figured Jenna would be going with black.
So a few peeps on tap for the outlaw show! kewl!
Ya I figured Jenna would be going with black.
So a few peeps on tap for the outlaw show! kewl!
Jun 26, 2005 | 07:55 PM
Elite Pro Rider
Lazy Boy Rider!
Lazy Boy Rider!
Joined: Jun 2003
Posts: 15,700
Likes: 0
Puget Sound/Seattle NW Area Riders Meet HERE!!!
Originally posted by: wingdude Jenna broke a "****" off her radious, I think. It is right where it joins at the elbow. No cast yet, she sees a specialist on Monday. She also did something to her wrist, don't know what til then.
Jun 26, 2005 | 08:06 PM
Elite Pro Rider
Do you have a balloon?
Do you have a balloon?
Joined: Jul 2002
Posts: 6,853
Likes: 0
Puget Sound/Seattle NW Area Riders Meet HERE!!!
Originally posted by: 2mnyToyz
Parts list:
Steering stem
Handle bars
Grips
Throttle lever
Front brake lever
Gas cap
+++++++++++++++++++++
Anybody have feed back on what kind of handle bars to order? I see there are a bunch-o-choices. OEM bars were a good fit...
Grips... anybody have a preference?
What's so good about the Roll Design steering stem? RMATV is proud of it apparently...
Kinda funny looking through the RMATV catalog... the illustrations for the clutch levers are shown on the right hand side of the handle bars... Initally thought I found brake levers.
Parts list:
Steering stem
Handle bars
Grips
Throttle lever
Front brake lever
Gas cap
+++++++++++++++++++++
Anybody have feed back on what kind of handle bars to order? I see there are a bunch-o-choices. OEM bars were a good fit...
Grips... anybody have a preference?
What's so good about the Roll Design steering stem? RMATV is proud of it apparently...
Kinda funny looking through the RMATV catalog... the illustrations for the clutch levers are shown on the right hand side of the handle bars... Initally thought I found brake levers.
I like mid grade Renthals- they will take a roll over, but if they don't, they were 70 bucks. Buy $200 bars and hurt them, you'll wanna cry.
Want my dad to try his luck on that stem? He is 7 for 8 on getting them straight.
Jun 26, 2005 | 09:44 PM
Pirate Biker
Limping Rider!
Limping Rider!
Joined: May 2003
Posts: 61,719
Likes: 55
From: Snohomish, Washington
Puget Sound/Seattle NW Area Riders Meet HERE!!!
Originally posted by: HappaRap
Well now I have something, in 1980 I shattered my head, they cut it open, cleaned all the garbage out and said, Ah, you didn't need that anyway, hummm, so many parts you really can get by without [img]i/expressions/face-icon-small-happy.gif[/img]
Originally posted by: wingdude Jenna broke a "****" off her radious, I think. It is right where it joins at the elbow. No cast yet, she sees a specialist on Monday. She also did something to her wrist, don't know what til then.
That explains A LOT!!!!!!!!!lLOL
Jun 26, 2005 | 09:46 PM
Pro Rider
Joined: Jun 2003
Posts: 1,706
Likes: 0
Puget Sound/Seattle NW Area Riders Meet HERE!!!
Originally posted by: TractorPacker
We have a stock gas gap, If you want a freebe, zilch, nothing, notta![img]i/expressions/face-icon-small-wink.gif[/img]
I like mid grade Renthals- they will take a roll over, but if they don't, they were 70 bucks. Buy $200 bars and hurt them, you'll wanna cry.
Want my dad to try his luck on that stem? He is 7 for 8 on getting them straight.
Originally posted by: 2mnyToyz
Parts list:
Steering stem
Handle bars
Grips
Throttle lever
Front brake lever
Gas cap
+++++++++++++++++++++
Anybody have feed back on what kind of handle bars to order? I see there are a bunch-o-choices. OEM bars were a good fit...
Grips... anybody have a preference?
What's so good about the Roll Design steering stem? RMATV is proud of it apparently...
Kinda funny looking through the RMATV catalog... the illustrations for the clutch levers are shown on the right hand side of the handle bars... Initally thought I found brake levers.
Parts list:
Steering stem
Handle bars
Grips
Throttle lever
Front brake lever
Gas cap
+++++++++++++++++++++
Anybody have feed back on what kind of handle bars to order? I see there are a bunch-o-choices. OEM bars were a good fit...
Grips... anybody have a preference?
What's so good about the Roll Design steering stem? RMATV is proud of it apparently...
Kinda funny looking through the RMATV catalog... the illustrations for the clutch levers are shown on the right hand side of the handle bars... Initally thought I found brake levers.
I like mid grade Renthals- they will take a roll over, but if they don't, they were 70 bucks. Buy $200 bars and hurt them, you'll wanna cry.
Want my dad to try his luck on that stem? He is 7 for 8 on getting them straight.
Wait till you all see the parts list coming from nwcuties house, I'm sure they'll be looking for parts real soon!!