You sounded interested in the stem... it's yours if you want it. I'll take the gas cap [img]i/expressions/face-icon-small-happy.gif[/img]. Found an 05 OEM stem for $93 new.

Mid grade Renthals... Anything special 'bout those that you like? Not sure what to look for as far as height and bend...

 

Karl- beware of the "banshee bend", they have a mean sweep to them, it's like 100 mm sweep. purdy hard on the wrists. the honda bend and the suzuki bend, hi cr bends work well too.

 

Bill, hope Brandon's exrays come out alright [img]i/expressions/face-icon-small-smile.gif[/img]

Karl bummer on the parts list [img]i/expressions/face-icon-small-sad.gif[/img] I HATE when that happens [img]i/expressions/face-icon-small-wink.gif[/img] but at least YOUR OK!!

Joel, maybe we should have your Dad do a couple stems of ours [img]i/expressions/face-icon-small-smile.gif[/img][img]i/expressions/face-icon-small-blush.gif[/img] I KNOW the 300 is tweeked & one of the blaster ones is I"m sure oh hell Ron's is too probably now that I think about it LOL (my wipe out last yr. w/ it [img]i/expressions/face-icon-small-blush.gif[/img][img]i/expressions/face-icon-small-blush.gif[/img])

WEll we worked on the mtorhome today, new plugs,wires,& air filter also a starter sylenoid but that didnt fix it's not starting(just decided this morning that it didn't want to start [img]i/expressions/face-icon-small-mad.gif[/img]) so now we have to figure out WTF is going on w/ that!!! But at least we are getting some stuff done before out Id. trip.

What's everyones plans for the 4th of July??????? Might be having a get together trying to figure out what everyone else is doing [img]i/expressions/face-icon-small-smile.gif[/img]

 

Dirtmomma, your motorhome is a Dodge right? If it is, there is a fuseable link fuse on the firewall under the hood. It is a porcelan fuse in a rectangular black case, fairly small. Mine was located just to the left of the power brake vac unit. Mine burned out and the motorhome would turn over but not start.
Good luck!

 

Awww, I was trying to ride it much nicer than the way I ride my own [img]i/expressions/face-icon-small-wink.gif[/img] I do have to say, I like that littler version of my quad. I'm too used to the power I have in mine, but it gave me a little sense of what to recommend to a noobie friend of mine if she decides to start looking for her own quad.Thanks for trusting me with your ride Jenna. Glad to hear we didn't break you, too. Try harder next time! [img]i/expressions/face-icon-small-wink.gif[/img] [img]i/expressions/face-icon-small-happy.gif[/img]

 

Well it won't even turn over [img]i/expressions/face-icon-small-confused.gif[/img][img]i/expressions/face-icon-small-confused.gif[/img] it's like it has a dead battery but the radio,dome light work?? He juped it from underneath w/ a screwdriver? & it fired right up, thinking maybe the alternator is toast????? Man the one for the old bus was like $38 this one is $94 arrggg LOL

 

i was hoping Ray would have offered you the scrammy
maybe next time[img]i/expressions/face-icon-small-shocked.gif[/img]

I hope eveyone heals up OK
I think that moon got to everyone this weekend. I stayed away from the Rappy all weekend. I was having a little trouble with quadspeed right off the getgo,,,so i stuck pretty much to the 185s (looking back,,,,it was a good idea)

thanks to the easton group for another great time!!!!!
and thanks Jayna and angie for a good time at salmon la sac!!!

 

To test to see if the fusible link is bad, run a jumper from the positive terminal on the battery to the plus terminal on the coil. If it runs the link is bad and if it doesn't you have other issue.

 

If you can jump it at the starter with a screwdriver the starter solenoid is bad and it's part of the starter on a Dodge so you need a new starter.

 

well our parts list is as follows...
250ex...
handlebars
right front wheel
right front tire
sraighten plastic mounting brackets


400ex ....
steering stem

450r...
both lower a arms (look like gull wing arms now)
both front wheels(some one decided to go rock crawling with a group following...nick)
new engine skid plate
frame needs welded
and sub frame broken (might be able to have it welded)