ive got a 10lb sledge??

 

That would do it [img]i/expressions/face-icon-small-happy.gif[/img]

 

I've got a plitting maul, since you need something split!

 

I figured you'd at least have a sawsall to offer him [img]i/expressions/face-icon-small-wink.gif[/img]

 

Better yet, I have an air chisel!

 

BFH is the reason the cases are coming apart [img]i/expressions/face-icon-small-happy.gif[/img] Mikey is gonna weld her up tight and punch a new hole in her [img]i/expressions/face-icon-small-happy.gif[/img]

 

If you want to take it over to the farm you can use the hydraulic post driver that mounts on the blade of a D-6. We get filming rights. [img]i/expressions/face-icon-small-smile.gif[/img]

 

LMFAO, I bet you do [img]i/expressions/face-icon-small-happy.gif[/img]

 

What the hell you driving with a post pounder on a D6? we use an JD 892 allot to drive fence post [img]i/expressions/face-icon-small-happy.gif[/img]

 

Lots of places in the spring of the year the ground is too wet to get around well with a wheel tractor. The 6 will usually just push a wood post into the ground but in rocky areas the thumper comes into play. In the fall thumper gets used a lot. With steel post your less likely to bend them in dry or rocky ground if you bump them down.