Old PSAR thread - please see the new one
Originally posted by: Bigdaddy660R
Captn........Karl
Try some Marvel Mystery Oil................ About a cap full to a tank of fuel [img]i/expressions/face-icon-small-smile.gif[/img]
Originally posted by: 2mnyToyz
Those in the know... is there anything that should be used to lube a flat slide carb? Randy was talking about a dry film lube last night.
Those in the know... is there anything that should be used to lube a flat slide carb? Randy was talking about a dry film lube last night.
Try some Marvel Mystery Oil................ About a cap full to a tank of fuel [img]i/expressions/face-icon-small-smile.gif[/img]
Originally posted by: 2mnyToyz
Those in the know... is there anything that should be used to lube a flat slide carb? Randy was talking about a dry film lube last night.
Those in the know... is there anything that should be used to lube a flat slide carb? Randy was talking about a dry film lube last night.
Performance Coatings, Auburn Wa
Originally posted by: tencubed
Hmmm - - - Wonder where everyone is today? Post count is down to about four an hour past six hours. Yesterday it was running eight times that. [img]i/expressions/face-icon-small-smile.gif[/img]
.
Hmmm - - - Wonder where everyone is today? Post count is down to about four an hour past six hours. Yesterday it was running eight times that. [img]i/expressions/face-icon-small-smile.gif[/img]
.
Originally posted by: maggiesboy
I have heard of folks sending the slides down to performance coatings in Auburn and having them impregnated with a dry film type of goo, similar to the process they use on piston skirts.
Performance Coatings, Auburn Wa
Originally posted by: 2mnyToyz
Those in the know... is there anything that should be used to lube a flat slide carb? Randy was talking about a dry film lube last night.
Those in the know... is there anything that should be used to lube a flat slide carb? Randy was talking about a dry film lube last night.
Performance Coatings, Auburn Wa
That is what I was refering to, they also have dry film lubricants that you can apply your self in the shop at home that work well.
The marvel mystery oil works well also when running race fuel and does a good job of lubing the slide and top end.
Originally posted by: MotoQuadChick
Yes Rookie big time...I needs my beauty sleep...specially if I ever wanna be as beautiful as our host Brenda is...
Originally posted by: HappaRap
Rookie [img]i/expressions/face-icon-small-tongue.gif[/img]
Originally posted by: MotoQuadChick I'm going back to bed...ttyl
Originally posted by: warriorqueen
Looks like a great party!
Rod I was at Tahuya on Saturday as well. We parked at the elephandel (SP) parking lot. It was packed when we got there so right when you pull in there we were off to the right. We had a blast. Got alittle wet but I love it down there. It's alot better than Reiter that's for sure. We rode to the sand pit and played around there for a bit. There was about 9 quads in the group I was in. Where did you guys park?
Looks like a great party!
Rod I was at Tahuya on Saturday as well. We parked at the elephandel (SP) parking lot. It was packed when we got there so right when you pull in there we were off to the right. We had a blast. Got alittle wet but I love it down there. It's alot better than Reiter that's for sure. We rode to the sand pit and played around there for a bit. There was about 9 quads in the group I was in. Where did you guys park?
We rode the Tahuya River trail over to the 4x4 trails then back to the staging area for some skid plate tightening (not mine). We then took the Mission Creek trail to the pit, across the road to Overland and all those trails over there, then back on Mission Creek trail, after a few wrong turns and dead ends, and the staging area for a short break (it was about 3PM by this time) Then we rode out to Goat Ranch road and down to Spillman Campground, then to the 4x4 trails and a nasty little hill climb. I made it up, alomost flipping at the top and then I told the others not to try it. Then back to the staging area. Finishing up around 4:30. Great fun! Just now washing the dirt out of the gear.
Originally posted by: TractorPacker
Carissa has 10 tooffesses now. Do not, I repeat do not, put your finger in there to look at them. The lil monster will bite.
Carissa has 10 tooffesses now. Do not, I repeat do not, put your finger in there to look at them. The lil monster will bite.
Originally posted by: maggiesboy
getting a NOT (new old toy) [img]i/expressions/face-icon-small-wink.gif[/img]
Originally posted by: tencubed
Hmmm - - - Wonder where everyone is today? Post count is down to about four an hour past six hours. Yesterday it was running eight times that. [img]i/expressions/face-icon-small-smile.gif[/img]
.
Hmmm - - - Wonder where everyone is today? Post count is down to about four an hour past six hours. Yesterday it was running eight times that. [img]i/expressions/face-icon-small-smile.gif[/img]
.
Originally posted by: HappaRap
So, who's heading to Beverly next weekend?
So, who's heading to Beverly next weekend?
any plans for breakfast going over the Hill? and what time are you early birds planning on going?






