Raptor valve adjustment?
#11
05-25-2003, 02:57 PM
Raptor valve adjustment?
the intake adjustment is usually to loosen the gap,the valves get beat into the valve seat and close the gap making the valve early or even hang open.taking off raptor plastic is worst part of job.anyone who never did them should or you will never get it running right,
#12
05-25-2003, 05:39 PM
Raptor valve adjustment?
Originally posted by: atvrider82
Also, when I change the oil it says to drain the crankcase and the oil tank. Then put oil in the oil tank and start the engine. My question is does it suck the oil out of the tank into the engine when you start it,
cause the last thing I want to do is start the engine without oil!!!!
Also, when I change the oil it says to drain the crankcase and the oil tank. Then put oil in the oil tank and start the engine. My question is does it suck the oil out of the tank into the engine when you start it,
cause the last thing I want to do is start the engine without oil!!!!
On the oil change, after draining both tanks, fill the top tank first and start the Rappy and let it run for about 2 minutes. shut it off and fill the same tank again. The engine will pull the first tank in so don't worry about no oil getting to engine..[img]i/expressions/face-icon-small-cool.gif[/img]
#13
05-04-2012, 11:12 AM
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)