what gear
#4
#7
Trending Topics
#8
what gear
ok if its a stock blaster with no mods or gearing mods start with second gear. when u get up to the staging lights (the tree its called) give it little bit of gas (probably about 2500 rpm) then when u see the first light comes on pin it ( dont be afrade to blow it because u wont) and when you see the third light come on dump the clutch in the middle of the light (when it comes on and between where it goes off) you WILL have to shift to third befor the 60 foot mark.
remember that its a blaster so dont be afrade to sit on the gas tank, and youl probably want to do the same thing as above with a modded blaster.
NOW if the light is a pro light ( when all the lights come down at the same time) then when you see the staging lights come on keep rollin about 3-4 inches (because u got about 6 inches befor you have gone to far.) then wait till the other racer is staged. then start to get the rpms up and wait till u see the lights come on, then dump the clutch once u see them (a fast as u can because all the lights blink at the same time so it is very hard to red light)
hope this help (by the way people he was talkin about dragracing.
remember that its a blaster so dont be afrade to sit on the gas tank, and youl probably want to do the same thing as above with a modded blaster.
NOW if the light is a pro light ( when all the lights come down at the same time) then when you see the staging lights come on keep rollin about 3-4 inches (because u got about 6 inches befor you have gone to far.) then wait till the other racer is staged. then start to get the rpms up and wait till u see the lights come on, then dump the clutch once u see them (a fast as u can because all the lights blink at the same time so it is very hard to red light)
hope this help (by the way people he was talkin about dragracing.