Blaster Wreck, something bent!
#1
![Default](https://atvconnection.com/forums/images/icons/icon1.gif)
My buddy wrecked my Blaster. It will not steer properly. If your looking a the front wheels, both of them are leaning the same way. They should be tilt in, not leaning the same way. I think its the Spindle\knuckle on the front left wheel. Thats were the bent wheel is. Any advice would be nice? Has anyone else wrecked or bent something similiar?
Thanks
Thanks
#2
![Default](https://atvconnection.com/forums/images/icons/icon1.gif)
Why is it that the owner is never the one who crashes the bike. My buddy just crashed my blaster too. My bumper is bent in, and the lower a-arm is cracked and bent. It still rides fine, but I just hope my frame isn't bent, if it is, I donno what i'm going to do. I have a dg bumper coming in this week, and the a-arm has been ordered from the dealer. I'll let you know how it goes after i replace them both this weekend.
#4
![Default](https://atvconnection.com/forums/images/icons/icon1.gif)
I check the Tie rod, its good. (on both sides)
I took both spindles off and the left one was Bad-Bent!
I bent it out using a vice, blow torch, and huge cheater bar.
Once I re-installed the spindle it did straighten up some.........
The wheels are suppose to be tilt in, but now the left one is straight up not tilted.
Other words I need a new spindle.
I found a good place to buy guarantee used & straight parts for half the price of new!
The spindle will be $45.00 instead of $80.00
I took both spindles off and the left one was Bad-Bent!
I bent it out using a vice, blow torch, and huge cheater bar.
Once I re-installed the spindle it did straighten up some.........
The wheels are suppose to be tilt in, but now the left one is straight up not tilted.
Other words I need a new spindle.
I found a good place to buy guarantee used & straight parts for half the price of new!
The spindle will be $45.00 instead of $80.00
#6
#7
Trending Topics
#9
#10