big bear front end question
#1
big bear front end question
I have a 2000 big bear 4x4
I am replacing the bearings and have been unable to remove the knuckle without much success - I have removed the tie rod, nut and cotter pin - I have removed the other two nuts and cotter pins from the knuckle - top and bottom - (this is at the end of the A Arms) - then removed both cir-clips from the tops of the joint -
it should be easy to remove them - but they wont budge - I have tried liquid wrench - I have tried a little heat - I have beat the crap outta them, but nothing.
These are the joints that hold the knuckle to the a arm - a little rubber boot is there - is there another nut that I have missed? What am I doing wrong?
BTW - I am hitting the joints from the bottom (where the nut and cotter pin is)
Is it possible I need to drive them down from the top?
Any help is appreciated
Gary C
I am replacing the bearings and have been unable to remove the knuckle without much success - I have removed the tie rod, nut and cotter pin - I have removed the other two nuts and cotter pins from the knuckle - top and bottom - (this is at the end of the A Arms) - then removed both cir-clips from the tops of the joint -
it should be easy to remove them - but they wont budge - I have tried liquid wrench - I have tried a little heat - I have beat the crap outta them, but nothing.
These are the joints that hold the knuckle to the a arm - a little rubber boot is there - is there another nut that I have missed? What am I doing wrong?
BTW - I am hitting the joints from the bottom (where the nut and cotter pin is)
Is it possible I need to drive them down from the top?
Any help is appreciated
Gary C
Thread
Thread Starter
Forum
Replies
Last Post
3quadbob
Classifieds, Garage Sale & Swap Shop
2
09-18-2016 09:46 PM
bonanza 440
Polaris Ask an Expert! In fond memory of Old Polaris Tech.
1
06-26-2015 10:01 PM
hoopduerr
Polaris Ask an Expert! In fond memory of Old Polaris Tech.
3
06-02-2015 09:01 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)