Yamaha Discussions about Yamaha ATVs.

Yoshimura says stock jetting is ok?

Thread Tools
 
Search this Thread
 
Old Jul 17, 2003 | 06:39 PM
  #11  
QueenQuad's Avatar
Weekend Warrior
Joined: Jul 2003
Posts: 2
Likes: 0
Default Yoshimura says stock jetting is ok?

o yeah a motor will run the fastest with the most horsepower when its the leanest
 
Reply
Old Jul 17, 2003 | 06:57 PM
  #12  
HoundDog06's Avatar
Pro Rider
Joined: Dec 1999
Posts: 1,114
Likes: 0
Default Yoshimura says stock jetting is ok?

And if your head isn't already swimming with questions like "How lean is too lean?", check out this thread. (Have apirin handy!)

~HoundDog
 
Reply
Old Jul 18, 2003 | 02:39 AM
  #13  
AustinONeal's Avatar
Thread Starter
|
Pro Rider
Joined: Oct 2002
Posts: 1,045
Likes: 0
Default Yoshimura says stock jetting is ok?

some one tell me what i need where to get it and how much

ill pick up whatever it needs
 
Reply
Old Jul 18, 2003 | 09:41 AM
  #14  
BlackWidow's Avatar
Pro Rider
Joined: Nov 2002
Posts: 316
Likes: 0
Default Yoshimura says stock jetting is ok?

Well I wouldn't let black in the exhaust tip bother me too much. If anything, you got a leaner mixture by putting the pipe on.

If it's running good, then I would leave it alone. If your hunger is for more power, then buy a Pro Flow kit with a K/N or foam filter and a jet kit. Take the airbox lid off, get a little filter for the tube that hooks up to your snorkel and jet it according to the directions in the jet kit.

As far as four strokes making the most power, they like being a little on the rich side rather than a two stroke, which likes the mixture a little on the lean side.

 
Reply
Old Jul 18, 2003 | 10:04 AM
  #15  
Murph66's Avatar
Range Rover
Joined: Jul 2002
Posts: 148
Likes: 0
Default Yoshimura says stock jetting is ok?

I don't see much point in putting a pipe on without opening up the airbox also.Do the airbox mods Yoshi recommends by cutting (2) 1 3/4" holes in the lid. You don't need a jet kit. Yoshi recommends 150/155 Mikuni jets. Don't change clip position or anything else. Set your idle fuel screws at 2.5 - 3 turns out. You will like the results. I do
 
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
ReconBayou
Kawasaki
11
Oct 31, 2022 05:37 PM
XxS0ccerstarxX
Honda
2
Sep 22, 2015 02:40 PM
Bonzhonda300ex
TheATVSuperStore
0
Sep 17, 2015 01:21 PM
Bigtwin700
Introduce Yourself
3
Sep 9, 2015 09:32 AM
XxS0ccerstarxX
Honda
0
Sep 8, 2015 12:02 AM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 



All times are GMT -5. The time now is 08:30 PM.