I was told that it is safe to mix Yamalube 2-S in the tank of my 2000 Blaster at 32:1. I am concerned about this because they make a special oil for use when the oil pump is bypassed. What is your info about this?[img]i/expressions/face-icon-small-confused.gif[/img]

 

what do u mean mix.....if u fill the oil tank up u should b good to go......unless u want a richer mixture u can put some oil in the gas but the oil injector and 32;1 may b a little 2 rich

 

I mean bypass the oil pump and mix it with the gas by the gallon[img]i/expressions/face-icon-small-smile.gif[/img]

 

yeah that should be safe. If you bypassed it you have to mix it with something but follow the recommendations on the container, usually there are mixtures and ratios.

Get yourself a ratiorite cup to make it easy, available at most dealers.

 

Which would be best the Yamalube 2s or the 2r, I think it is the 2r

 

Yamalube 2r is just fine

 

You can premix either 2s or 2r id does not matter. 2r is the better or should I say more expensive. I ran 2s in mine I put 3 years over 160 hours on my topend and it looked like new when I rebuild it. Either one will do fine.

 

Thanks.[img]i/expressions/face-icon-small-cool.gif[/img]