Cutting back tranny gears
#1
#2
Cutting back tranny gears
Thanks for the info raptor. So basically it makes it last/work longer/better. So how much do you cut them back or how do you know how much to cut them back? Also, as far as the cryo thing goes, Is everyone sure this is good. I remember they were discussing this about cryo treating gun barrels and at first it was the cool good thing to do then after a little while everyone was saying it was not worth the money at all for some reason.
Later,
Mike
Later,
Mike
#3
Cutting back tranny gears
Like airraptor said.................
They only back cut the gear dogs,around 10 to 11 degrees(stock is somewhere around 3 to 5 degrees)they some times cut the slots a little longer(race cut),making shifting easier(although it will make more a clunk sound when shifted)The cost is higher then $50 bucks though,MRE did my backcutting for about $200,then $80 to freeze them by KPchryo
They only back cut the gear dogs,around 10 to 11 degrees(stock is somewhere around 3 to 5 degrees)they some times cut the slots a little longer(race cut),making shifting easier(although it will make more a clunk sound when shifted)The cost is higher then $50 bucks though,MRE did my backcutting for about $200,then $80 to freeze them by KPchryo
#4
#6
Thread
Thread Starter
Forum
Replies
Last Post
cbcole02
Kids Quads & Other ATV's - Ask an Expert!
5
09-07-2015 06:16 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)