Does this cam require the valve guides to be machined down?

 

thats what they were telling me..ppl of this site... and it totally takes away the ridablity of the quad..its all or none...
buy my clutch cover man..make me an offer

 

Thats what I thought, but I wasn't sure.
I don't need ridabiltiy, just power.[img]i/expressions/face-icon-small-happy.gif[/img]

 

Ward, I got by without having to have my guides machined down. Every motors clearances are different so it is really hard to say whether you will have to machine them or not. I havnt had any trouble since I put mine back together but according to web cam they suggest machining or getting there shorter guides and they also reccomended to me to get springs up to a 500 lift which they were still working on at the time to get made; most aftermarket springs for the Raptor are good up to a 450 lift. By the way I am running the springs good up to a 450 lift and have not had any trouble also. Hope this helps with your question. Slim

 

Thanks alot Slim![img]i/expressions/face-icon-small-cool.gif[/img]

 

slim is right but i had to have mine machined but i will sell you the cam now

 

Dollarbillz, What didn't you like about it? Have you ever ran a Stage II Hot Cam? Just interested.[img]i/expressions/face-icon-small-smile.gif[/img]

 

why did u have to have yours machined ? will i need mine machined ? how much u want for the cam ?

 

Dollarbillz is working on a new project. The 685 is the drag race cam.

 

I saw Dollar's signature the other day and was shocked to say the least. Something like back on gas and no nitrous.[img]i/expressions/face-icon-small-shocked.gif[/img]


I would like to try it out, but its going to HAVE to wait awhile.[img]i/expressions/face-icon-small-sad.gif[/img]