how loud is the stock pipe? (in decibals) how much do u want for it? and about how much is the air filter and that other stuff? thanks

 

The stock pipe is like 94 db. The adaptor & K&N filter are around $150.00.I'll take $200.00 for the pipe 6 extra discs & 3 different stainless steel bolt lengths.

 

raptormattman
any idea what desible range the White Bros. R4 is at? Mine is surprisingly loud.

 

Not for sure but with 18 discs in my e series i tested at 103. Iknow its more than that probable around 110 is my guess. Thats what i'm running now. If not more.

 

Thanks raptormattman,
that would about my guess too. I gotta say I love the power but I'll have to jump on the Warrior if I want to putt around on my property. My raptor is so load now that I think my neighbors would shoot me if I they had to hear it for any length of time. I kinda like it though!

 

That's a sick bike UBETRUN!! If you want an idea of all the different expenses that need to go into a Raptor to make it race ready check out UBETRUN's list and Raptor. What size wheels do you have on that? And have you ever had any frame problems?

 

Thanks for the compliment! 18" rear and 19" front. Most of the welds have paint flaking off but no cracks, I'm going to gusset and powdercoat it black this winter.

Not listed in my profile are the new hubs, Baldwin front and Durablue rear. The stock front bearings didn't last one season and I got tired of the rear tires wobbling on the Lonestar axle, both problems solved.

 

oh ya i wanted to ask you guys, i was thinking about getting my rims annodized or whatever its called. if it can be done i am also going to have my clutch levers and bars done. where can i have that done and can they do it the color of my frame? (i have the red and white 04) about how much would it cost? also would anyone like to buy a cobra slip on cause i have one for a warrior. its almost 6 months old and in very good condition. LOUD!!! OOOh and one more thing, what does stage 2 jets mean? arent jets jets? and if i was going to get some, what are the best kind and about how much $ do the run? thanks !!

 

Raptorman55,
check out http://www.dynojet.com/carbjet.shtml
it will help explain what the different jet stages mean.

If you buy the Power-Up kit for the Raptor (I think around $200 if I'm not mistaken) it should include the jets and the K&N filter and adapter. You really should do the jets, filter, and pipe at the same time for optimal performance.

 

raptor55 were are you located? I'm from mn. I do have a powder coater here that is cheap but good. I think the frame is considered wineberry red.