First off I'd just like to say hi to everyone, since I'm new here on the boards. I'm totally new to the ATV world, but I'm excited about getting started!

I really like the look of the Yamaha Wolverine, and after doing some searches on this board it seems like a good sport-utility quad to buy. I'm planning on purchasing a new one here in the next couple weeks. However, I've never really seen a direct answer to how it would perform plowing snow. Does it have enough power? Will I need chains for the tires? What type of blade would be the best fit? My driveway is about 400ft. long, so I'll have a lot of snow to move come winter.

I'd also like to use the wolvy for towing a mowing deck in the summer. I just built a house on 5 treeless acres, part of which is overgrown brush. I'm probably going to end up with a swisher deck, but since I'll have both brush and grass on my property, should I get the rough cut deck and just use it everywhere? I'd really like to avoid buying 2 seperate products, but I also don't want to mow my my entire property every week - it'd be nice to let parts of it go for a month or so.

Thanks in advance for any advice, and if I've missed a post that's already answered these questions, just post the link.

eric

 

I use my Wolverine for all-over riding/working,and have not had any problems. I have never pushed a plow, but as long as you don't use the huge ones, stay with the 48-50" ones, shouldn't be a problem. I pull a rough cut mower, used it in chest high swamp grass with little problems, and pull a drag with cement blocks on it just fine. It is small enough to get you into just about any spot, and is a great trail rider/sport utility quad. If you plan to work yours a lot, stay with the stock size 23" tires, so you won't lose any bottom end power. Later, when you feel like more power, a pipe and filter will give you more snap, and if you want, a little overbore and a higher compression piston will really wake it up.

 

My pal had a snow plow on his Wolvy, don't remember what size, but it seemed to do good pushing snow. I don't see you having any trouble pulling a mower either. I don't know about the new models ,but mine didn't come with a rear hitch,that was an accessory. They are easy to install though. Hope you enjoy this forum and that new Wolvy. I'm jealous hehehehe .

 

I have been plowing snow with a stock Wolverine for several years. I have a 50" home-made plow. Power will not be an issue. You will lose traction long before you lose power. In fact I usually plow in 2nd gear. Due to the light front end it will tend to push the front end over. This can be solved by adding weight on the front or using chains. I use chains on the front only . It will handle 12" of fresh snow, but does need a litttle help keeping the front end planted for the deep stuff. So, to answer your question, yes, a Wolverine will handle a plow very good based on it what it is. Remember the Wolvy is good at alot of things but probably not the best at any one thing. Thats why I like mine.

 

my friends timberwolf plows snow so i would hope the wolvy could. as 95wolv said dont get anything too big.the person i bought my wolverine from said that a bigger plow is too heavy for the front end, but does ok pushing the snow around. [img]i/expressions/face-icon-small-smile.gif[/img] the wolverine is a good choice btw

 

Thanks for the info, everyone. Knowing that others use it for plowing makes me feel a bit better about getting a wolverine! I want something that'll be a blast to ride, but I also need it to be functional. This way, the wife stays happy [img]i/expressions/face-icon-small-smile.gif[/img]

BTW, I know the msrp on a new model is like $5199, but has anyone had any sucess with bargaining at the dealer? I'm planning on paying cash....

Thanks again!

 

usually you can almost always get a price better than the msrp or get extra stuff for free if not go to a differnt dealer. does anyone have an otd price on a wolverine?

 

www.hindsmotorsports.com 2004 Wolverine 350 $4599 I saw this in the Cycle Trader. There was another dealership in there with the same price but I don't remember what their address was.

 

We've got A 2003 Wolverine and my wife just loves it! We put a MPRB pipe (Stainless steel) and a jet kit with a K&N filter with an "Outerwear"cover. The bike has plenty of power and is very easy to drive. It has the same motor as the Warrior, except from what I hear Yamaha has souped it up a little to handle the 4X4 configuration. Their a little cold blooded, but after they warm up everything is FINE!

Works performance makes after market shocks and I suggest after the first ride that you drain all the oils and change the filters. You'd be surprised how much metal and crap comes out! We've got 2 Duncan Racing GN Banshees and a Bombardier DS-650 and the easisest overall ATV to ride is the Wolverine. I looked at a bunch of other machines and all the others were way TOO HEAVY and cost another 2 grand. The nice thing is it's shaft drive, has reverse, elec. start and has some good snap and isn't a dog like most 4X4 ATV's.

Buy one and enjoy!

GLWBEAR
(Gary Williams)



[img]i/expressions/face-icon-small-smile.gif[/img][img]i/expressions/face-icon-small-happy.gif[/img]

 

ems04Wolvy that other dealership was WWW.abernathyonline.com You haven't posted where your from so these dealerships my be to far. But I'm sure you can beat the price you listed. OH by the way they haven't changed the Wolvy much in its whole life so if you could find a left over 03 you could probably get a GREAT deal.