Blaster Question
#21
Hey kid that got picked on by kdx200ryder dont worry about it hes stupid i know him. I just got my pipke kit yesterday and put it on today it sounds great and adds a little more power. You feel it more than it adds. Prolly 24h.p. wit the b1. Hope this helps
#22
stock blaster : about 55mph. give or take a few
piped blaster-toomey: 60mph give or take a few, but you will get there so much faster. pipe= acceleration.
the best tires for the blaster : itp holeshots, razrs, or fast trekkers. all 3 have great traction, wear time, and they all break loose in turns.
piped blaster-toomey: 60mph give or take a few, but you will get there so much faster. pipe= acceleration.
the best tires for the blaster : itp holeshots, razrs, or fast trekkers. all 3 have great traction, wear time, and they all break loose in turns.
#25
Veronicca and foxracer20
If you want good power gains
1) Good pipe and silencer, Toomey, FMF, LRD, etc
2) Call Vito's @ 248-969-9168, and get there jet kit and advance crank key for the Blaster
3) K&N Filter with outer wear, remove the air lid box
4) Shave about 0.20 of the head to increase compression
5) Hang on!!!
If you want good power gains
1) Good pipe and silencer, Toomey, FMF, LRD, etc
2) Call Vito's @ 248-969-9168, and get there jet kit and advance crank key for the Blaster
3) K&N Filter with outer wear, remove the air lid box
4) Shave about 0.20 of the head to increase compression
5) Hang on!!!
#27
to get more power out of you blaster get it p and p it helps a hole lot my friends smoke piped raptors and banshees no prob i have videos to prove if you dont believe me .also get a milled head and maybe a 3 mill stroker .good luck with the mods.
Thread
Thread Starter
Forum
Replies
Last Post
greg86hd
Polaris Ask an Expert! In fond memory of Old Polaris Tech.
1
Sep 16, 2015 12:32 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)




