I have not had a warrior in a few years...but it seems I remember a problem like this. If my memory is working there is a wire that attaches down by the pegs....I think it is the brake side...but it could be the reverse wire near the shifter.

Take a look at all connections...it should not take very long.

 

Try taking the two wires off the battery, and clean them good with a wire brush or emery cloth. Get them good and shiny, then wire brush the posts, on the battery . Make sure they are snug when you put them back on.

 

Check all your connections and your fuse, then try jumping across your solenoid to make sure it didn't go bad. If it still doesnt start it may be time to get your starter rebuilt. Did you try to pop start it?

 

Okay I went down and cleaned the connection and everything. I jumped across the solenoid anf the engine turned over. Does that mean the solenoid is bad and needs to be replaced? What would cause it to go bad?

Thanks

John