stock jets and needles?
#1
#3
stock jets and needles?
I'm going to assume you mean buying mikuni jets that are larger than the stockers. Mikuni is the same as gtyr. DJ is a different setup, and I'm not sure what K&N uses. Jet kids are a waste of money, imo. In a raptor, you know what needles you need, and should have a good idea about the pilots. Pilots are 3 bucks a piece. You would have to buy a lot of them individually to add up to the 50+ dollar jet kit. Pilots and needles are availible at any dealer or parts shop.
I dont know if you need this information, but stock jetting on the rap is 140/145 with 22.5 needles 3rd clip and 2/2.5 turns on the air fuel screw. (screw is different on many)
I dont know if you need this information, but stock jetting on the rap is 140/145 with 22.5 needles 3rd clip and 2/2.5 turns on the air fuel screw. (screw is different on many)
#4
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)