Is there anywhere close to Missouri that does a good job porting for banshees

 

Independent Cycle
1113 south marshall
Sedalia, MO 65301

Phone 660-826-0149

I've never got a port job done there but i know he does real good work, super nice guy too. I know he does a lot of motor building, he also does custom bikes (harley's, nortons, indians, etc.) The last time i was there he had two banshee motors he was building for drag. He told me $300 for a port job, that's my 2 cents, good luck. Bye the way if you do go there, the guy's name is Tim Foster.

 

Check your pm's,I do Banshee portwork and I'm in Texas.If ya have any questions about what you should expect or what kinda portwork ya need,feel free to ask.

 

dirtworx in Grand Island Nebraska does amazing things with Banshees!

 

FTZ racing in cape girraudo does real nice work

 

Usually if you can find even a good boat shop that does motor work on all their 2 stroke stuff. . you can find someone who likes to get the occasional atv motor and play with it. . i know some guys at boat places that do great work on any motor. . something to maybe think about. . good luck

 

how much hp can you get of a pipe and porting?

 

It all depends on what type of porting and what pipes and intake you use.With FMF's,Pro Circuits,Toomey's,and the other normal pipes and my dune port I get around 60-65hp depending on carb. size.With a drag pipe like CPI's or FTZ's and my full drag port on Alky 35mm PWK's I get around 90-100hp depending on how good you are at tuning.This setup will go mid to low 4's on a stock chassis in 300ft.Porting is your biggest hp increase for the money.I also recommend to all my customer's that the crank be trued and welded and cut the stock head and rechamber it.The dune port will go low 5's in 300ft and still be really reliable.

 

PM me I just got a great idea you might be interested