When I replace my bent steering stem with a new one is there any bearings or other things that must be replaced?

 

depends on if ur bushings are good or not

 

the only thing you may have to replace is ur bushings if they are bad

 

alright, thanks i'll have to check them

 

there is only one bushing on the bottom of it.
It is probably still good. I bent mine and the I just bent it back, still works and alot cheaper.

 

if i were you yamaharider4life015 i would replace your stem instead of doing things half assed like ol' shaveO no offence Shavo. also was you bushing damaged??

 

any luck on them bushings

 

Its not half a$$ is you do it right. I had a local machine shop press it and straightened it as good as new. its re-inforced inside so it won't be happening again. Plus its all sanded down and polished up so in my opinion its better then new.

Don't be bashing my **** without knoing the facts dude

 

The bushings look alright, i would have taken my steering stem to a machine shop but i already bought a good used one, if you find a machine shop that does a good job it is probably the way to go, thats what i did with my axle