Trinity Racing releases 780cc Stroker for the Raptor!
#53
Trinity Racing releases 780cc Stroker for the Raptor!
Originally posted by: TheRaptorMan
So does Mad Racing make this kit as well or just done the tunning?... What was the problem with it?
So does Mad Racing make this kit as well or just done the tunning?... What was the problem with it?
#56
Trinity Racing releases 780cc Stroker for the Raptor!
Originally posted by: marbleous
IT really cost that much from Harry, and it doesnt run.
IT really cost that much from Harry, and it doesnt run.
Glad that mark from MAD racing got it figured out. What does it like to rev to???
#57
Trinity Racing releases 780cc Stroker for the Raptor!
raptor660fam that wasnt a stroker and trinity didnt port it. i dont have a dyno and i took it there for tuningand flowbench work. believe it or not its a 727 the reason why i couldnt get it running was it had a grounding problem and it only fired every other time. the reason i was to the far right of sparks is because i know alot of the guys and one of my best frinds owns the black 727 of sparks and he was helping figure it out . we will be ther this year with a few more bikes.800stroker,780stroker 727,690, 480ex, 470 yfz, z450 stroker, and looking for a 450 honda to work some magic on.
1badraptor is your bike running yet?
1badraptor is your bike running yet?
#58
Trinity Racing releases 780cc Stroker for the Raptor!
raptor660fam tell the truth which bike is faster the craycraft or sparks and by how much? whats the difference in mods? never race a craycraft and was just wondering how well they run. i'm not saying i'm better but if my bikes run with his then i know where i stand. thanks for the info
#59
Trinity Racing releases 780cc Stroker for the Raptor!
Don't really know for sure in the Dunes. We both definitley agree my bike is faster though. My bike has been on two trips to the Cinders and that is all (8,000ft elevation) I will run much better in the dunes because i can go through the whoops better than my dad with my +6, i weigh more, he is a better driver...a lot of variables, but with him on my bike it really shines!!!
Mine is a low compression 10:1 727 and his is a 12.5:1 Sparks 690 (higher than that, more like 13:1 probably???)
we are built for duning, and mine especailly for reliability hence the low compression, i also did crank work and rod...
Mine is a low compression 10:1 727 and his is a 12.5:1 Sparks 690 (higher than that, more like 13:1 probably???)
we are built for duning, and mine especailly for reliability hence the low compression, i also did crank work and rod...