A few banshee questions
#1
Hello all. I got two questions right now. First: I notice when I first started it(after sitting a day) it will smoke either out of the tip of the head, or the connection where the pipe and the silencer meet( I have a motofast 2-1 pipe). What is this?
Second: I need a repair manual..Clymer has nothing newer than a 94..I have a 96..what should I do?
Thanks,
Jason
Second: I need a repair manual..Clymer has nothing newer than a 94..I have a 96..what should I do?
Thanks,
Jason
#3
All the banshees are the same.. at least the 1990 and up are all the same.
87-89 had J arms instead of A arms and different stock gearing..
The clymer manual will have everything you need, the only spec I could never find is flywheel to pick up distance. (I guessed at it and still don't know.)
Just my $.02
Brad
87-89 had J arms instead of A arms and different stock gearing..
The clymer manual will have everything you need, the only spec I could never find is flywheel to pick up distance. (I guessed at it and still don't know.)
Just my $.02
Brad
#5
#7
there is one more thing that was changed...Go down to your dealer and order a (stock)rear sprocket for an 89 banshee...then order one for a 96.....
different number of teeth.....
I argued with my dealer for a half an hour about that..... I was under the impression that the only thing that changed was the arms.... I guess I was wrong...or they are wrong. But the Microfiche for each model year shows different "stock" tooth counts on the sprockets.
different number of teeth.....
I argued with my dealer for a half an hour about that..... I was under the impression that the only thing that changed was the arms.... I guess I was wrong...or they are wrong. But the Microfiche for each model year shows different "stock" tooth counts on the sprockets.
Trending Topics
#8
#9
#10
87-90 were J arms... 91 and up are A arms
The gearing changed as well.. went from a 13 front to a 14.. and dropped a tooth or 2 in the rear. (I think)
ALSO.. the rear hub size is different. it has a different bolt pattern on the early banshee. Don't know the model year it changed, but it might have been from the 90 to the 91s.
The gearing changed as well.. went from a 13 front to a 14.. and dropped a tooth or 2 in the rear. (I think)
ALSO.. the rear hub size is different. it has a different bolt pattern on the early banshee. Don't know the model year it changed, but it might have been from the 90 to the 91s.