I have recently purchased a blaster and i would like to know how to do a donut. I really don't want to try anything unless someone tells me how because it is my first quad i am not that experienced.

 

A little advise- Don't do what other people tell you to do when it comes to doing a donut. Just play around on the bike and get comfortable and you'll figure it out. If you had a DVX 400 it would be very simple.

 

Why would it be easier if i had A dvx400??

 

It was just a joke, although the DVX I just rode a minute ago was pretty squirely so you could give it a little clutch
in the loose stuff and get the tail end to come around pretty easy.

 

On dirt or pavement????

Trial and error buddy. I found it helps to stay up by the handle bars. You want as lil weight on the rears as possible. Once your spinning it isn't too hard. Try in a wide open area too.

 

practi fish tailing first then it will come natural

 

OK,do it in something loose like dirt or gravel and not pavement if its your first time.Lean over the front end and turn the wheels to the side you want to donut,then get the wheels to spin and let the rear swing round.I dont know how a blaster performs donuts but I donut the Raptor without using the brakes(not on pavement),with dirt bikes I had to use the front brakes a little to control it even in dirt/gravel.So follow the basics and the rest comes from trying it out...

 

1. lean over handlebars
1.5. Turn handle bars
2. Hold front brake
3. Give 1/4-1/2 throttle
4. Slowly let go of the clutch

Like they said do it on dirt or gravel its alot easier

 

thanks guys.. I'll try mabey monday or tuesday.. I still need to get used to the bike so i'll just ride around my block alittle because if i get too crazy i'll get arrested.

 

Cops give the best donut advice.........