what would be the best mod to do to my warrior, i need more power. i want to do a hot cam or a big bore, what does everyone have or reccomend. please dont respond if your going to say sell it and buy a diff quad, i know that would be better, but its not an option. thanks guyz

 

sell it and buy a Raptor 350 .. they have waayyyyy more power and much better suspension than the warrior will ever have [img]i/expressions/face-icon-small-confused.gif[/img] LOL .. just kidding ...

I'd say go with a 435cc kit ..

 

It all depends on how much $ you want to spend. You could to the 450 lift cam and valve springs, pro flow filter kit and a good pipe. Replace the stock carb for the best results. Hope this helps[img]i/expressions/face-icon-small-smile.gif[/img]

 

WHO MKES THESE KITS? THE 435 AND THE 450 KIT...IF THEY ARE DIFFERENT. WOULD THAT BE THE BEST THING TO DO THOUGH FOR LOW MAINTENANCE. THE CAM,VALVES, FILTER, AND A PIPE??

 

powroll makes the 430 big bore kit they make a 430 bore kit and a 430 bore/stroke kit they also have i beleive a 385 and 365 bore or stroke kits with every thing u need

 

First off...sell the Cobra for an Alba or HMF....the cobra pipe sucks!

Money....for cheap you can get
Alba Kit
.450 lift cam w/ 10.75:1 compression piston (in either .20 over, 1mm, or 2mm bores)
for about $500

or you can get the awesome kit which is...

FST 446 Big Bore/Stroke Kit
Everything you need for $650...but then another 600 in machining.

 

yea i'd say if you've got some money give FST a call.



If not, go to alba and get their kit, you should be able toget a nice performance gain from that.

 

WHATS T NUMBER FOR FST, IT SOUNDS FARMILIAR, WHAT DOES IT STAND FOR???? THANKS FOR ALL THE HELP GUYS I APPRECIATE IT.