??? raptor hotcam???
#1
#6
??? raptor hotcam???
Valves need to be set according to hc specs. .2 and .25 I think. Around 8 and 11 thousandths but dont take my word for it.
The decomp pin is in the body of the cam. If you installed the cam, you should have put one in. Its on a little spring and is used to release compression while starting the bike. Make sure it is not stuck in or out, most importantly out. HC is notorious for problems with the decomp pin. If you have to, you can use the stocker or take it out all together.
The decomp pin is in the body of the cam. If you installed the cam, you should have put one in. Its on a little spring and is used to release compression while starting the bike. Make sure it is not stuck in or out, most importantly out. HC is notorious for problems with the decomp pin. If you have to, you can use the stocker or take it out all together.
#7
Trending Topics
#9
??? raptor hotcam???
Originally posted by: 400exKiller990
just put a stage 1 hotcam in my raptor and was wondering if it is normal for the motor to be noisier?? it seems the valve train is making the noise... thanks
just put a stage 1 hotcam in my raptor and was wondering if it is normal for the motor to be noisier?? it seems the valve train is making the noise... thanks
rnuts